Cisco Systems OL-7064-01 manual Drops Chart, To 16 links

Page 52

Chapter 8 Working with Linksets

Viewing Real-Time Data for a Linkset

Field or Button

Description

 

 

Drops Chart

Displays the Drops for the linkset as a function of time, including data for up

 

 

 

to 16 links.

 

 

 

To see the exact time and data coordinates for a data point, left-click the data

 

 

 

point. The coordinates are displayed in the format (hh:mm:ss, dd.dd), where:

 

 

 

hh:mm:ss is the time for that data point in hours, minutes, and seconds.

 

 

 

dd.dd is the number of drops for that data point.

 

 

 

To remove the data for a link from the chart, click the icon in the SLC field.

 

 

 

To return the data to the chart, click the icon again.

 

 

 

The total time displayed in the chart is specified in the Time Window (mins)

 

 

 

field.

 

 

 

New data points are added to the right side of the chart. When the chart

 

 

 

reaches the end of the time window (for example, after 5 minutes, if the Time

 

 

 

Window (mins) field is set to 5), new data points continue to be added to the

 

 

 

right side of the chart, while old data points “drop off” the left side of the

 

 

 

chart.

 

 

 

If a poll is missed (for example, as a result of an SNMP timeout), SGM

 

 

 

ignores the missing data point, stops drawing the line, and waits for the next

 

 

 

valid data point to begin drawing the line again.

 

 

 

To scroll left, right, up, or down in the chart, drag the cursor while holding

 

 

 

down Ctrl and the left mouse button.

 

 

 

To zoom in on a section of the chart, drag the cursor while holding down Shift

 

 

 

and the left mouse button.

 

 

 

To reset the chart to the default view and scaling, click Reset.

 

 

SLC

Displays up to 16 color-coded icons, one for each link (SLC) in the Drops

 

 

 

Chart.

 

 

 

To remove the data for a link from the chart, click the icon in this field. To

 

 

 

return the data to the chart, click the icon again.

 

 

 

SGM enables you to customize the symbols, line styles, and colors assigned

 

 

 

to data points in real-time data charts. For more information, see the Charts

 

 

 

Settings, page 23-13.

 

 

Reset

If you scrolled or zoomed the chart, resets the chart to the default view and

 

 

 

scaling.

 

 

 

 

 

 

Cisco Signaling Gateway Manager User Guide

 

 

8-52

 

 

OL-7064-01

 

 

 

 

Image 52
Contents Working with Linksets Viewing Basic Information for Linksets Right-Click Menu for All Linksets Right-Click Menu for a Specific LinksetConfirm Deletions checkbox in the Startup/Exit DeleteGo To SP View Configuration Details View Real-Time Data and ChartsGo To Node View ComponentsDrill-Down Linkset Access List Event History Snmp Trap MessagesEvent History Status and Trap Event History Network StatusLinkset Table Links Active LinksCongested Links IgnoredEvents Display the event icon in this fieldLast Status Date and time that the status of the linkset last changedSection on page A-5 Viewing Detailed Information for a Linkset Opens the Linkset Details Window for the selected linkset Linkset Details Right-Click MenuA new window Deleting a Node section on page 6-100for more Go To Node Event History Snmp Trap Messages Linkset Details Components LinksetType Type of link. Possible link types are Select the checkbox to exclude the linkIndicates whether there is a note associated with the link Event icon in this fieldSection on page A-4 Linkset Details Configuration Data Naming InformationStatus Information Is IgnoredDescription StatusCurrent status of the linkset. Possible values are Status ReasonGeneral Information Linkset TypeInbound ACL Outbound ACLLinkset Details Notes Linkset Details Recent EventsLinks Information Links Information sub-section contains the following fieldsSet Filter Apply FilterRemove Filter PauseAdjust Row Height Time DifferenceFind Create Sound FilterCategory Severity Message NameTime Ack ByLinkset Details Linkset Access Lists Probe ConnProbe Link MessageAccess List Poll IntervalLast Poll OutLinkset Statistics Details Poll Settings Poll Interval secsSeconds Current Poll IntervalLinkset Statistics Details Configuration Data Linkset Statistics Details NotesLinkset Statistics Details Recent Events Linkset Statistics Details Linkset Access ListsLinkset Statistics Details Statistics Packet Information Bit Information or Byte InformationSent Per Sec Received Per SecUtilization Information Send Plan CapacitySend Utilization % Send Utilization % = Bits Sent Per Sec/Planned CapacityReceive Plan Capacity Plan-capacity CS7 linkset configuration commandReceive Utilization % Linkset Statistics Details Charts Service InformationReceivedUtilization Chart for a Linkset ReceivedUtilizationReceived Utilization Chart Adjacent linkset, select it in this list boxTime Window mins MinutesChart Received UtilizationReset Show threshold lineFor Scale to thresholdUtilization Chart SendUtilizationSend Utilization Dd.dd is the send utilization percentage for that data pointThreshold for the selected link Packets Received Chart PktsRcvdPerSec chartPktsRcvdPerSec To return the data to the chart, click the icon again Received ChartReturn the data to the chart, click the icon again Packets ReceivedPackets Sent Chart PktsSentPerSec chartPktsSentPerSec Sent Chart BitsRcvdPerSec or BytesRcvdPerSec chart Received Chart or Bytes Received ChartBitsRcvdPerSec or BytesRcvdPerSec Following fields and buttonsAs a function of time, including data for up to 16 links Bytes Received ChartReceived per second for that data point Sent Chart or Bytes Sent Chart BytesSentPerSec chartBitsSentPerSec or BytesSentPerSec Bytes Sent Chart Chart or Bytes Sent ChartFunction of time, including data for up to 16 links Sent per second for that data pointDrops chart contains the following fields and buttons Drops tab. SGM displays the Drops chartDrops To 16 links Drops ChartDd.dd is the number of drops for that data point Cancel SaveViewing Notes for a Linkset Deleting a Linkset from Your NetworkDeleting a Linkset from the SGM Database Ignoring a Linkset Viewing Ignored Linksets Viewing the Network Status Linkset DashboardHeader Update Interval Last UpdateAccess Lists Server NameViewing ITP Linkset Status Section on page A-5 Status Reason Viewing ITP Linkset Details Related TopicSGM Linkset Details Table Peaks Latest Reports LinkDescription Adjacent Signaling Point Poll Error MessageAdjacent Point Code GTT Accounting Enabled Packets Received Per SecPackets Sent Per Sec Bits Received Per SecReceive Utilization Planned Capacity for ITP Not SetCapacity for ITP Not Set Displays Set Plan Capacity on ITPSend Utilization = Bits Sent Per Sec./Planned Capacity For a linkset of type Serial or HSL, available bandwidth forIf Send Plan Capacity is not set on the ITP for one or more Signaling link code SLC ID for the link SGM Links Detail TableInterface Name PortsCongestion UtilizationEither a utilization percentage or a number of Erlangs Bits/SecViewing ITP Linkset Information Access Lists Node, signaling point, or linkset name Node NameName, and Linkset Header Server Name Header Node/SP/LinksetOL-7064-01