Cisco Systems SS7 manual How to configure the Local Point Code LPC

Chapter 2 Using SS7Cfg to Configure Your Gateway

Working in the Main Window

In the following example, the links for Gateway 1 (see Figure 2-1) will be configured, then combined into two linksets (STP1 and STP2), and the routes to the SSPs (SSP1 and SSP2) will be defined.

Note Some of the dialog boxes in this process contain Back and Cancel buttons, which allow you to return to the previous dialog box or cancel out of the process, respectively.

Begin by configuring the Local Point Code (LPC).

Note The LPC is the point code assigned to the gateway.

How to configure the Local Point Code (LPC)

Step 1 Right-click the MTP3 layer and select the Modify Point Code option from the shortcut menu.

Cisco ICM Enterprise Edition SS7 Gateway Configuration Tool User Guide Release 6.0(0)

2-8