Cisco Systems SN 5428-2 manual Attaching the Rails to the Rack

Chapter 2 Installing the SN 5428-2 Storage Router

Installing the SN 5428-2 Chassis

Step 6 Align the holes in the rails with mounting holes in the rack. Ensure that the rails are level from front to rear and side to side. (See Figure 2-6.)

Step 7 Attach the front of each rail by screwing one screw through the front top hole of the rail into a corresponding hole in the mounting post. (See Figure 2-6.) Attach the rear of each rail by screwing two screws through the rear holes of the rail into the corresponding holes in the mounting post.

Figure 2-6 Attaching the Rails to the Rack

85413

	Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01		2-11