Cisco Systems 5525-X, IPS4345, IPS4360, S170, C170, M170, 5512-X, 5515-X, 5545-X, 5555-X Round Hole Racks

Page 6

5Round Hole Racks

Using a Phillips head screwdriver, remove the square insert from the rear of the rail. Keep the two Phillips head screws.

330884

Remove the square insert from the front of the rail. Keep the two Phillips head screws.

330882 Align the round hole insert C to the rear of the rail, and secure it with two of the saved screws.

330881 Align the round hole insert C to the front of the rail over the hooks, and secure it with two of the saved screws.

330880

See “Attach the Outer Slide Rail to Round and Square Hole Racks” on page 8.

6

Image 6

Contents Slide Rail Installation Instructions Verify the Box Contents Disassemble the Slide Rail Attach Inner Rails to the Chassis Verify the Rack Type Round Hole Racks Threaded Hole Racks Attach the Outer Slide Rail to Round and Square Hole Racks Attach the Outer Slide Rail to Threaded Hole Racks Install the Chassis Obtaining Documentation and Submitting a Service Request Secure the ChassisCisco Systems, Inc. All rights reserved