Cisco Systems 5515-X, IPS4345, IPS4360, S170, C170, M170, 5512-X, 5525-X, 5545-X Threaded Hole Racks

Page 7

6Threaded Hole Racks

Using a Phillips head screwdriver, remove the square hole insert from the rear of the rail.

330884

Remove the square hole insert from the front of the rail.

330882

Align the threaded hole bracket D to the front of the rail over the hooks. Secure it with the threaded hole standoff E using a flat-head screwdriver.

330878

No additional hardware is necessary for the rear adapter.

330876

Repeat these steps page for the other slide rail. Go to the“Attach the Outer Slide Rail to Threaded Hole Racks” section on page 9.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Slide Rail Installation Instructions Verify the Box Contents Disassemble the Slide Rail Attach Inner Rails to the Chassis Verify the Rack Type Round Hole Racks Threaded Hole Racks Attach the Outer Slide Rail to Round and Square Hole Racks Attach the Outer Slide Rail to Threaded Hole Racks Install the Chassis Secure the Chassis Obtaining Documentation and Submitting a Service RequestCisco Systems, Inc. All rights reserved
Top Page Image Contents