Cisco Systems OL-6109-01 manual Basic Zone Configuration

Page 1

C H A P T E R 4

Zone Configuration

This chapter describes zone configuration. It includes the following major sections:

•Basic Zone Configuration

•Zone Remote Guard List

•Zone Traffic Learning

•Zone Detection

Basic Zone Configuration

This section describes the initial Zone configuration procedures that relate to zone parameters such as: zone name, description, and zone IP address.

It describes the following procedures:

•Defining a New Zone

•Duplicating a Zone

•Removing a Zone

•Removing All Zones

•Displaying Zone Templates

•Entering a Zone Command Level

•Describing a Zone

•Defining the Zone IP Address

		Cisco Traffic Anomaly Detector User Guide
		Cisco Traffic Anomaly Detector User Guide
	OL-6109-01			4-1
	OL-6109-01			4-1

Image 1

Contents Basic Zone Configuration Zone ConfigurationDefining a New Zone Duplicating a Zone Removing a Zone Displaying Zone Templates Removing All ZonesEntering a Zone Command Level Defining the Zone IP Address Describing a ZoneRemoving a Zone IP Address Removing all Zone IP Addresses Zone Remote Guard ListRemoving a Guard from the Zone Remote Guard List Adding a Guard to the Zone Remote Guard ListActivating the Interactive Recommendation Mode Interactive Recommendations ModeZone Traffic Learning Deactivating the Interactive Recommendation ModeLearning Phase 1 Policy Construction Terminating Learning Phase 1 -Policy Construction Aborting Learning Phase 1 Policy Construction Accepting Learning Phase 1 Policy ConstructionLearning Phase 2 Threshold Tuning Accepting Learning Phase 2 Threshold Tuning Terminating Learning Phase 2 Threshold TuningAborting Learning Phase 2 Tuning Threshold Learning Phase VerificationChoose ENTER. The following partial sample screen appears Zone DetectionGuard-Protection Activation Forms Zone Detection Verification Ending the Zone Detection