Cisco Systems OL-6109-01 manual Duplicating a Zone

Page 3

Chapter 4 Zone Configuration

Basic Zone Configuration

Note If no zone template is specified, the zone will be defined using the Detector DEFAULT zone template.

–base-zone-name—(Optional) The name of a desired zone used as a template for the new zone.

–interactive—(Optional) The operation mode of the new zone is set to interactive (see the “Interactive Recommendations Mode” section for further details).

Note Choosing Enter without specifying the zone template defines a zone by the Detector default zone template.

2.Choose ENTER. Below is an example of the zone command implementation:

admin@DETECTOR-conf# zone scannet admin@DETECTOR-conf-zone-scannet#

Duplicating a Zone

The user may duplicate a desired zone and define a new, identically- configured, zone.

To duplicate a zone from the Configuration command group level perform the following:

1.From the Configuration command group level type the following:

admin@DETECTOR-conf# zone <new-zone-name> copy-from<base-zone-name>

Where:

–new-zone-name—A zone name string. An alphanumeric string should start with a letter, hold no spaces, and should be limited to a length of up to 63 characters. The string may contain underscores.

–base-zone-name—The name of a desired zone used as a template for the new zone.

 

 

Cisco Traffic Anomaly Detector User Guide

 

 

 

 

 

 

OL-6109-01

 

 

4-3

 

 

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Basic Zone Configuration Zone ConfigurationDefining a New Zone Duplicating a Zone Removing a Zone Displaying Zone Templates Removing All ZonesEntering a Zone Command Level Defining the Zone IP Address Describing a ZoneRemoving a Zone IP Address Removing all Zone IP Addresses Zone Remote Guard ListRemoving a Guard from the Zone Remote Guard List Adding a Guard to the Zone Remote Guard ListActivating the Interactive Recommendation Mode Interactive Recommendations ModeZone Traffic Learning Deactivating the Interactive Recommendation ModeLearning Phase 1 Policy Construction Terminating Learning Phase 1 -Policy Construction Aborting Learning Phase 1 Policy Construction Accepting Learning Phase 1 Policy ConstructionLearning Phase 2 Threshold Tuning Accepting Learning Phase 2 Threshold Tuning Terminating Learning Phase 2 Threshold TuningAborting Learning Phase 2 Tuning Threshold Learning Phase VerificationChoose ENTER. The following partial sample screen appears Zone DetectionGuard-Protection Activation Forms Zone Detection Verification Ending the Zone Detection
Top Page Image Contents