Cisco Systems WRT110 manual Radius

Chapter 3

Advanced Configuration

type of algorithm, AES or AES or TKIP. The default is AES or TKIP.

RADIUS Server  Enter the IP address of the RADIUS server.

RADIUS Port  Enter the port number of the RADIUS server. The default value is 1812.

Shared Secret  Enter the key shared between the Router and the server.

Key Renewal  Enter a Key Renewal period, which instructs the Router how often it should change the encryption keys. The default Key Renewal period is 3600 seconds.

RADIUS

This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.)

Security Mode > RADIUS

IMPORTANT: If you are using WEP encryption, always remember that each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly.

RADIUS Server  Enter the IP address of the RADIUS server.

RADIUS Port  Enter the port number of the RADIUS server. The default value is 1812.

Shared Secret  Enter the key shared between the Router and the server.

Encryption  Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits). The default is 40/64 bits (10 hex digits).

Passphrase  Enter a Passphrase to automatically generate WEP keys. Then click Generate.

Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually.

TX Key  Select which TX (Transmit) Key to use. The default is 1.

RangePlus Wireless Router 16