Special Notes for Glass Cooktops:
Cooktop temperatures increase with the number of surface units that are on. With 3 or 4 units turned on, surface temperatures are high so be careful when touching the cooktop. The hot surface indicator light will remain lit after the surface unit is off until the surface is cool enough to touch.
NOTE:
•At HI and Medium High settings never leave food unattended. Boilovers cause smoking and greasy spillovers may catch fire.
•At Medium Low and LO settings melt chocolate and butter on a small surface unit.
•When a surface unit is turned on, the unit can be seen glowing red within a few seconds. The red glow will turn on and off (cycling) to maintain the selected heat setting. With poor cookware, you will see frequent cycling of the unit off and on. Good, flat cookware will minimize the cycling. See the Surface Cookware Tips section.
•It is safe to place hot cookware from the oven or surface on the glass surface when it is cool.
Hot Surface Indicator Light
A “HOT SURFACE” light will glow brightly when any radiant element is turned on, and will remain lit after the unit is turned off until the surface is cool enough to touch. Each element has its own “HOT SURFACE” indicator light.
• It comes on instantly when the unit is turned on.
•It stays on even after the unit is turned off.
•It glows brightly until the unit is safe to touch.
HOT SURFACE
A “HOT SURFACE” light will glow brightly when any halogen/radiant element is turned on.
11
