Cisco Systems 1260 specifications 20A. Statement

Page 3

Warning

Warning

Warning

Caution

Caution

Note

Note

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than:

20A. Statement 1005

Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Statement 245B

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

The fasteners you use to mount an access point on a ceiling must be capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes on the mounting bracket.

This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by Environment A of the IEEE 802.af Standard.

The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power injector in air handling spaces.

Use only with listed ITE equipment.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Cisco Aironet 1260 Series Lightweight Access Point About this Guide Safety Instructions20A. Statement Overview UnpackingAccess Point Ports and Connections, Bottom Controller Discovery Process Configuring the Access PointPreparing the Access Point Performing a Pre-Installation Configuration Installation SummaryController Layer 3 devices Cisco Aironet access points Pre-Installation Configuration SetupPage Page Configuring Security Settings Page Deploying the Access Point on the Wireless Network Mounting the Access PointUsing Dhcp Option TroubleshootingShows the location of the access point Status LED Checking the Access Point LEDLED Troubleshooting the Access Point Join Process Page Declarations of Conformity and Regulatory Information Vcci Statement for Japan 03-6434-6500 Industry Canada Statement 371-Power Cable and AC AdapterModels Page Page United States Declaration of Conformity for RF ExposureChinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Portuguese Translation Declaration of Conformity StatementsCisco AP c1260 Category Specification Access Point SpecificationsAccess Point Specifications
Top Page Image Contents