Cisco Systems 1260 specifications Access Point Specifications, Category Specification

Page 33

Type is always f1(hex). Length is the number of controller management IP addresses times 4 in hex. Value is the IP address of the controller listed sequentially in hex.

For example, suppose that there are two controllers with management interface IP addresses, 10.126.126.2 and 10.127.127.2. The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex f1080a7e7e020a7f7f02.

12Access Point Specifications

Table 2 lists the technical specifications for the 1260 series access point.

Table 2

Access Point Specifications

 

 

 

Category

 

Specification

 

 

Dimensions (LxWxD)

8.68 x 8.68 x 1.84 in. (22.04 x 22.04 x 4.67 cm)

 

 

 

Weight

 

1.9 lbs (0.86 kg)

 

 

Operating temperature

–4 to 131 degrees F (–20 to 55 degrees C)

 

 

Storage temperature

–22 to 185 degrees F (–30 to 85 degrees C)

 

 

 

Humidity

 

10% to 90% (noncondensing)

 

 

 

Antenna

 

Diversity system with RP-TNC connectors for external antennas.

 

 

 

Compliance

 

The 1260 series access point complies with UL 2043 for products installed

 

 

in a building’s environmental air handling spaces, such as above suspended

 

 

ceilings.

 

 

 

Safety

 

UL 60950-1

 

 

CAN/CSA C22.2 No. 60950-1

 

 

IEC 60950-1 with all national deviations

 

 

EN 60950-1

 

 

UL 2043

 

 

EMI and Susceptibility

FCC Part 15.107 and 15.109 Class B

 

 

ICES-003 Class B (Canada)

 

 

EN 301.489

 

 

EN 55022 Class B, 2000 version

 

 

EN 55024

 

 

VCCI Class B

 

 

 

 

 

33

Image 33
Contents Cisco Aironet 1260 Series Lightweight Access Point About this Guide Safety Instructions20A. Statement Overview UnpackingAccess Point Ports and Connections, Bottom Controller Discovery Process Configuring the Access PointPreparing the Access Point Performing a Pre-Installation Configuration Installation SummaryController Layer 3 devices Cisco Aironet access points Pre-Installation Configuration SetupPage Page Configuring Security Settings Page Deploying the Access Point on the Wireless Network Mounting the Access PointUsing Dhcp Option TroubleshootingShows the location of the access point Status LED Checking the Access Point LEDLED Troubleshooting the Access Point Join Process Page Declarations of Conformity and Regulatory Information Vcci Statement for Japan 03-6434-6500 Industry Canada Statement 371-Power Cable and AC AdapterModels Page Page United States Declaration of Conformity for RF ExposureChinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Portuguese Translation Declaration of Conformity StatementsCisco AP c1260 Category Specification Access Point SpecificationsAccess Point Specifications