Cisco Systems 1260 Installation Summary, Performing a Pre-Installation Configuration

Page 8

Note Access points mounted in a building’s environmental airspace must be powered using PoE to comply with safety regulations.

Cisco recommends that you make a site map showing access point locations so that you can record the device MAC addresses from each location and return them to the person who is planning or managing your wireless network.

Installation Summary

Installing the access point involves these operations:

•Performing a pre-installation configuration (optional)

•Mounting the access point

•Grounding the access point

•Deploying the access point on the wireless network

Performing a Pre-Installation Configuration

The following procedures ensure that your access point installation and initial operation go as expected. A pre-installation configuration is also known as priming the access point. This procedure is optional.

Note Performing a pre-installation configuration is an optional procedure. If your network controller is properly configured, you can install your access point in its final location and connect it to the network from there. See the “Deploying the Access Point on the Wireless Network” section on page 14 for details.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Cisco Aironet 1260 Series Lightweight Access Point Safety Instructions About this Guide20A. Statement Unpacking OverviewAccess Point Ports and Connections, Bottom Configuring the Access Point Controller Discovery ProcessPreparing the Access Point Installation Summary Performing a Pre-Installation ConfigurationPre-Installation Configuration Setup Controller Layer 3 devices Cisco Aironet access pointsPage Page Configuring Security Settings Page Mounting the Access Point Deploying the Access Point on the Wireless NetworkTroubleshooting Using Dhcp OptionChecking the Access Point LED Shows the location of the access point Status LEDLED Troubleshooting the Access Point Join Process Page Declarations of Conformity and Regulatory Information Vcci Statement for Japan 03-6434-6500 Statement 371-Power Cable and AC Adapter Industry CanadaModels Page Page Declaration of Conformity for RF Exposure United StatesChinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Declaration of Conformity Statements Portuguese TranslationCisco AP c1260 Access Point Specifications Category SpecificationAccess Point Specifications
Top Page Image Contents