Philips HTS5593, HTS5563 Set up speakers, Set up EasyLink HDMI-CEC control, Enable EasyLink

Option 3: Connect audio through analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX connectors on your home theater to the AUDIO OUT connectors on the TV or other device.

VCR

Set up speakers

Set up the speakers manually to experience customized surround sound.

Before you start

Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Audio] > [Speaker setup]

4 Enter the distance for each speaker, and then listen to the test tones and change the volume. Experiment with the speaker positions to find the ideal setting.

Set up EasyLink (HDMI-CEC control)

This home theater supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control.

Note

•• Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device.

•• Philips does not guarantee 100% interoperability with all HDMI-CEC devices.

Before you start

•Connect your home theater to the HDMI- CEC compliant device through HDMI connection.

•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.

Enable EasyLink

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [EasyLink] > [On] .

4 On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.

•On your TV, set the audio output to

'Amplifier' (instead of TV speakers). For details, see the TV user manual.

English

EN 13