Energy saving settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Screen saver]: Switch the home theater to screen saver mode after 10 minutes of inactivity.
•[Auto standby]: Switch the home theater to standby after 30 minutes of inactivity. This timer works only when a disc or USB play is paused or stopped.
•[Sleep timer]: Set the duration of the sleep timer so that the home theater is switched to standby after the specified period.
Speaker settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Advanced], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Enhanced audio]: Select [On] to enable audio post processing at the speaker and enable karaoke settings (if your product supports Karaoke).To play the original audio of the disc, select [Off].
Tip
•• Enable audio post processing before you select a predefined sound mode (see 'Sound mode' on page 26).
Restore default settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Restore default settings], and then press OK.
4 Select [OK], and then press OK to confirm.
»»Your home theater is reset to its default settings except for some settings such as parental control and DivX VOD registration code.
28EN