Philips HTS5593, HTS5563 user manual Set up the wired network, Set up the wireless network

Select [Done], and then press OK to exit.

EN

Select [Setup], and then press OK.

Select [Network] > [Name your Product:].

Press the Alphanumeric buttons to enter the name.

Set up the wired network

What you need

•A network cable (RJ45 straight cable).

•A network router (with DHCP enabled).

LAN

www

1 Using a network cable, connect the LAN connector on your home theater to the network router.

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [Network] > [Network installation] > [Wired (Ethernet)].

5 Follow the onscreen instructions to complete the setup.

• If connection fails, select [Retry], and then press OK.

6 Select [Finish], and then press OK to exit.

•To view the network settings, select [Setup] > [Network] > [View network settings].

Set up the wireless network

Your home theater is Wi-Fi ready. Connect a Wi-Fi	nglish
dongle for easy access to a wireless network.	E
What you need

•A network router (with DHCP enabled). For best wireless performance, coverage, and compatibility, use 802.11n router;

•A Wi-Fi dongle (Model: Philips WUB1110)

	Wi-Fi
	www
1	Press (Home).
2	Select [Setup], and then press OK.
3	Select [Network] > [Network installation]
4	> [Wireless (Wi-Fi)], and then press OK.
	Follow the onscreen instructions to select
	and set up the wireless network.
	• If connection fails, select [Retry], and
5	then press OK.
	Select [Finish], and then press OK to exit.
	• To view the network settings, select
	[Setup] > [Network] > [View wireless
	settings].

Personalize the network name

Name your home theater to easily identify it on your home network.

1 Press (Home).

2

3

4

5

15