Picture and video settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[TV display]: Select a picture format to fit the TV screen.
•[HDMI video]: Select the resolution of video signal that is output from HDMI OUT (ARC) on your home theater.
To enjoy the selected resolution, make sure that your TV supports the selected resolution.
•[HDMI Deep Color]: Recreate the natural world on your TV screen by displaying vivid images using billion colors. Your home theater must be connected to a Deep Color enabled TV through an HDMI cable.
•[Picture settings]: Select pre defined color settings for the video display. Select [User] to create your own setting.
•[Watch 3D video]: Set HDMI video to support 3D or 2D video.
•[User]: Select advanced settings for the video. Available only after you create a preset called 'User' under picture settings.
Note
•• If you change a setting, make sure that the TV supports the new setting.
Audio settings
1 | Press (Home). | English |
2 | Select [Setup], and then press OK. |
|
3 | Select [Audio], and then press OK. |
|
4 | Press the Navigation buttons and OK to |
|
select and change:
•[Night mode]: For quiet listening, decrease the volume of loud sounds on your home theater. Night mode is only available for
•[HDMI Audio]: Set the HDMI audio output from your TV, or disable HDMI audio output from the TV.
Parental control settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Change Password]: Set or change your password for parental control access.
If you do not have a password or have forgotten your password, enter 0000.
•[Parental control]: Restrict access to discs that are recorded with age ratings. To play all discs, irrespective of the ratings, select 8 or [Off].
Display settings
1 Press 
(Home).
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Auto subtitle shift]: Enable or disable automatic repositioning of subtitles on TVs that support this feature.
•[Display panel]: Set the brightness of the home theater front panel display.
•[VCD PBC]: Enable or disable the content menu navigation of VCD and SVCD discs with Play Back Control feature.
EN 27