Cisco Systems PSUS4 Status Tab Device, Status Tab Printer, Exit Tab, Select Printer, Details

Page 8

Chapter 2

Configuration

Select Printer

Logical Printer No:  In the drop-down menu, select the logical printer number (1-3) you wish to configure. Click Get Data to update the display with the current data for the selected logical printer.

Details

Pre-string (Hex)  Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.

Post String (Hex)  Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.

Convert LF to CR+LF  Select this option if you want to change all LF (line feed) characters to CR+LF (carriage return + line feed).

Change these settings as described here and click Save to apply your changes or click Cancel to cancel your changes.

The Status Tab > Device

The Device tab allows you to view information about the PrintServer. No settings can be changed on this screen. This screen is for information only.

Status > Device

Click Refresh to cause the PrintServer to retrieve this information again.

The Status Tab > Printer

The Printer tab allows you to view information about the Printer. No settings can be changed on this screen. This screen is for information only.

Status > Printer

Click Refresh to cause the PrintServer to retrieve this information again.

The Exit Tab

This tab is used exclusively for exiting the Web-based Utility.

Select the Exit tab and the following screen will appear. Click Yes if you want to exit the Utility. Click No if you don’t want to exit the Utility.

Status > Device

PrintServer for USB with 4-Port Switch

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PrintServer for USB with 4-Port Switch About This Guide Icon DescriptionsOnline Resources Copyright and TrademarksTable of Contents Chapter Product Overview Front PanelBack Panel Side PanelChapter Configuration How to Access the Web-Based UtilitySetup Tab How to Use the Web-Based UtilityProtocol Tab NetBEUI Protocol Tab TCP/IPProtocol Tab Apple Talk Printer Tab Internet Printing Printer Tab Logical PortOptions Mail ServerStatus Tab Device Status Tab PrinterExit Tab Select PrinterWindows IPP Client Setup Installation using setup.exeIPP Client Configuration for Windows 98, Me, 2000, and XP Chapter Internet Printing ProtocolChanging the IPP Port Settings Using IPP PrintersInternet Printing Protocol Chapter Bi-Admin Management Bi-Admin InstallationMain Option Bi-Admin Management UtilityStarting the Bi-Admin Management Utility Device Information Main Menu Configuration Screen Tabs AppleTalk Internet Printing Help Option Diagnostic OptionInitDevice Option Appendix a Troubleshooting PrintServer’s Status LED stays lit continuouslyAppendix B Specifications PSUS4Exclusions and Limitations Limited WarrantyObtaining Warranty Service Technical Support Safety Notices FCC StatementIndustry Canada Statement Avis d’Industrie CanadaDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Schedule Cisco Software License Agreement Cisco ProductsSoftware Licenses Software End User License Agreement Software End User License Agreement Schedule Network Magic Features Schedule Open Source and Third Party LicensesSoftware End User License Agreement Software End User License Agreement Schedule 3-B GNU Lesser General Public License Software End User License Agreement Software End User License Agreement Software End User License Agreement Openssl License OpenSSL License END of Schedule 3-C
Top Page Image Contents