Dynex DX-WEGRTR, DX-WGRTR warranty Question 8 How do I manually configure my network settings?

Page 5

Question 8: How do I manually configure my network settings?

In order for your computer to properly communicate with your router, change your PC’s TCP/IP settings to DHCP.

Note: The Dynex Wireless G Router and Wireless Enhanced G Router have been discontinued. Windows® 7 and Windows® 8 operating systems have not been tested with these routers. The routers may function normally with these operating systems; however, that usage is not supported by customer support.

To manually configure network settings in Windows Vista®, Windows® XP, or Windows® 2000:

1.Click Start, then open the Control Panel.

2.Double-click the Network and dial-up connections icon (Windows 2000) or the Network icon (Windows XP or Vista).

3.Right-click the Local Area Connection associated with your network adapter, then select Properties from the list. The Local Area Connection Properties window opens.

4.Select Internet Protocol (TCP/IP) from the list, then click Properties. Internet Protocol Properties window opens.

5.Select Obtain an IP address automatically and Obtain DNS server address automatically, then click OK. Your network adapter(s) are now configured for use with the router.

Note: If Use the following IP address is selected, set up your router for a static IP connection type. Write the address information down. You will need to enter this information into the router. See Question 18 for information on accessing your wireless router’s settings.

5

V1 13-0021

Page 4 Page 6
Image 5
Page 4 Page 6
Contents March SetupQuestion 1 Where do I place my wireless router? SetupQuestion 3 How do I set up a wireless network? Question 2 How do I connect my router to the modem?If your computer meets the system requirements Make sure that your computer meets the system requirementsIf the WAN light is on and the Connected light is blinking If the WAN light is off and the Connected light is blinkingQuestion 8 How do I manually configure my network settings? To manually configure network settings in Mac OS To change your wireless router name Question 9 How do I change my wireless network channel?Question 10 How do I change my wireless router’s name? To access the Web-Based Advanced User Interface Question 12 How do I connect to the wireless network?To connect with a Windows OS ConnectionsIf your network name is not listed If your network name is listedQuestion 18 How do I access my wireless router’s settings? Question 15 What is my wireless router’s range?To access the user interface UsageTo use the access point mode Question 21 How do I save my current configuration?To save a current configuration SecurityTo download and update a new firmware version Question 22 How do I restore a previous configuration?Question 23 How do I update my wireless router’s firmware? Question 25 How do I restore the factory settings? Question 24 How do I reset my router?Question 27 How do I secure my wireless network? General
Top Page Image Contents