Dynex DX-WGRTR, DX-WEGRTR warranty To manually configure network settings in Mac OS

Page 6

To manually configure network settings in Mac OS X:

1.Click the System Preferences icon. The System Preferences menu opens.

2.Click Network. The Network window opens.

3.Select Built-in Ethernet from the Show drop-down menu, then click the TCP/IP tab. The TCP/IP tab opens.

OR

Select Ethernet from the left menu, then click Advanced. The Advanced TCP/IP menu opens.

4.Select Using DHCP from the Configure or Configure IPv4 drop-down menu, then click Apply or OK. Your network adapter(s) are now configured for use with the router.

Notes:

If Manually is selected in the Configure list, set up your wireless router for a static IP connection type. Write down the address information. You will need to enter this information into the router. See Question 18 for information on accessing the router’s User Interface.

To connect using PPPoE you must configure your router for a PPPoE connection type in the User Interface. See Question 18 for information on accessing the User Interface.

6

V1 13-0021

Image 6

Contents Setup MarchQuestion 3 How do I set up a wireless network? SetupQuestion 1 Where do I place my wireless router? Question 2 How do I connect my router to the modem?Make sure that your computer meets the system requirements If your computer meets the system requirementsIf the WAN light is off and the Connected light is blinking If the WAN light is on and the Connected light is blinkingQuestion 8 How do I manually configure my network settings? To manually configure network settings in Mac OS Question 9 How do I change my wireless network channel? Question 10 How do I change my wireless router’s name?To change your wireless router name To connect with a Windows OS Question 12 How do I connect to the wireless network?To access the Web-Based Advanced User Interface ConnectionsIf your network name is listed If your network name is not listedTo access the user interface Question 15 What is my wireless router’s range?Question 18 How do I access my wireless router’s settings? UsageTo save a current configuration Question 21 How do I save my current configuration?To use the access point mode SecurityQuestion 22 How do I restore a previous configuration? Question 23 How do I update my wireless router’s firmware?To download and update a new firmware version Question 24 How do I reset my router? Question 25 How do I restore the factory settings?Question 27 How do I secure my wireless network? General