Specifying information about your system
You can configure the operation of the 562V Multimedia Controller to suit the way your system is set up, and the way in which you want to use it. For more information about these options see Changing the setup options, page 44.
These settings are configured automatically to appropriate values when you choose one of the standard Type settings, and you should not normally need to alter them; see Choosing standard settings, page 28.
To configure the multimedia controller
●Turn off the multimedia controller, using the power switch on the back panel.
●Turn on the power again while holding down the Display key on the front panel.
The display will show: | Conf |
|
| ||
|
| |
|
|
|
It will then show the first | 5OO |
|
configuration option: |
| |
|
|
●Press Display to move between the options.
●Press A or V to change the value of the current option.
The table below shows the options you can configure.
Option | Initial Value | |
Communications mode (500 or 200) |
|
|
5OO |
| |
Controller mode (Auto, Con, or NCon) |
|
|
| ||
Auto |
| |
System address |
|
|
| ||
SA=1 |
| |
Product address |
|
|
| ||
PA=1 |
| |
DAC mode (NDAC or DACT) |
|
|
| ||
DACT |
| |
Volume mode (VolM, VolS, or VolN) |
|
|
| ||
VolM |
| |
Video version (562 or 562V) |
|
|
| ||
562V |
| |
200 Series CD player (N or Y) |
|
|
CD?N | ||
Configuring the multimedia controller without a computer
33
