302 System setup
Operating system configuration
The Acer Altos G520 series server comes with Acer EasyBUILD that allows you to conveniently install your choice of operating systemTM . To start using EasyBUILD, follow the steps below.
1 Locate the EasyBUILD System CD included in the system package.
2 With your system powered on, gently press the optical drive Stop/ Eject button.
3 When the disc tray slides open, insert the EasyBUILD System CD with the label or title side of the disc facing upward.
Note: When handling the disc, hold it by the edges to avoid smudges or fingerprints.
4Gently press the disc down to make sure that it is properly inserted.
Caution! While pressing the disc, be careful not to bend the disc tray. Make sure that the disc is properly inserted before closing the disc tray. Improper insertion may damage both the disc and the optical drive.
5Gently press the drive Stop/Eject button again to close the disc tray.
6The Acer EasyBUILD sequence begins automatically. Follow all onscreen instructions.
For more information, refer to the EasyBUILDTMInstallation guide.
