Acer G520 series manual To install the Hot Plug HDD cage

46 3 Upgrading the system

4Install a hard disk in the hard disk carrier then secure it with the four screws you removed earlier.

5Insert the hard disk carrier into the cage with the lever fully extended.

6Push the lever back until it clicks into place. Make sure that the drive is properly inserted before closing the lever.

To install the Hot Plug HDD cage

1Detach the chassis panels and remove the air baffle.

2Connect the following cables to the backplane board (SCSI): a SCSI cable

b SCSI HDD 6 pin management cable