38 | 3 Upgrading the system |
3Open the system according to the instructions beginning on page 39.
4Follow the ESD precautions described in this section when handling a server component.
5Remove any expansion board(s) or peripheral(s) that block access to the DIMM socket or other component connector.
See the following sections for specific installation instructions on the component you want to install.
Warning! Failure to properly turn off the server before you start installing components may cause serious damage. Do not attempt the procedures described in the following sections unless you are a qualified service technician.
Post-installation instructions
Observe the following after installing a server component:
1See to it that all components are installed according to the described
2Reinstall any expansion board(s) or peripheral(s) that you have previously removed.
3Reinstall the air baffle.
4Reinstall the chassis panels.
5Connect the necessary cables.
6Turn on the system.
