Switching on and off
When not being used, the multimedia controller should be left in | To switch to standby |
the standby state. This uses a negligible amount of electricity, | ● Press Off (front panel) or Standby (remote). |
but ensures that the components of the multimedia controller | |
operate at maximum efficiency from the moment you start. |
|
If you are not going to use the multimedia controller for several days you should switch the unit completely off at the back
The display will show:
6
panel, and disconnect it from the AC power supply.
To switch on from standby
●Press Source (front panel), or select a source by pressing the appropriate source key on the remote: eg CD.
If the 562V Multimedia Controller is part of a Meridian system it will automatically switch on any other unit in the system, such as the CD player and Meridian DSP loudspeakers.
If you have other Meridian 500 Series equipment or Meridian DSP loudspeakers connected to the multimedia controller, these units will also switch to standby.
Using the multimedia controller
9
