Meridian America 562V.2 No lights are displayed when switching on, There is hum on the LP input

Troubleshooting

No lights are displayed when switching on

❍Check that your AC power supply is connected correctly.

❍Check that the ON OFF switch on the rear panel is in the ON position.

❍Check that the fuse on the multimedia controller rear panel and the fuse in the unit’s power plug have not blown; see To change the mains fuse, page 50.

There is hum on the LP input

The LP input is the most sensitive input on the multimedia controller.

❍Check that the tone arm is connected to the technical ground of the multimedia controller.

❍Check that the tone arm is connected to the power ground in the turntable.

❍If you are using a magnetic pickup, check that there is not another piece of equipment too near to the turntable or the left-hand side of the multimedia controller. If so, re-position the equipment to cure the problem.

There is hum on other inputs

❍Check your other equipment.

❍Consult your dealer.

48