Each video input option can be set to Last valid to leave the video loop unchanged when you select the source. You would usually do this for
Advanced
Specify the Advanced options as follows:
●If the source is connected to another Meridian unit, set Comms type to 1C for a Meridian CD player, 2C for a Meridian FM tuner, and 3C for a Meridian DVD player. Otherwise set it to None.
●If you have two Meridian source units of the same type you can configure them to have different Comms addresses. You can then select the appropriate source by specifying its Comms address in the Comms address field.
●Select Triggers 1 and/or 2 to switch the corresponding trigger output on when the source is selected.
Trigger 1 is usually selected for all sources, to switch on a power amplifier, and Trigger 2 is usually selected for video sources, to switch a TV.
Configuring the multimedia controller using a computer
43
