Dynex DX-E401 manual Enter the following settings, as appropriate, To configure IP filters

26 Configuring the router

	3 Enter the following settings, as appropriate:
Field		Description
Name		The name referencing the special application.
Trigger Port		The port used to trigger the application. It can be either a single port or a range
		of ports.
Trigger Type		The protocol used to trigger the special application.
Public Port		The port number on the WAN side that will be used to access the application. You
		can define a single port or a range of ports. You can use a comma to add multiple
		ports or port ranges.
Public Type		The protocol used for the special application.

CONFIGURING IP FILTERS

Filters are used to deny or allow LAN computers from accessing the Internet. The router can be set up to deny access to internal computers by their IP or MAC addresses. The router can also block users from accessing restricted Web sites.

To configure IP filters:

1Access the Configuration menu by following the instructions in To access the Web-based configuration utility: on page 13.

2Click the Advanced tab, then the Filters button. The Filters screen opens.