Cabletron Systems 5500 manual Interface Label, Administrative Status Label, Interface Type Label

Page 25

Interface Device View

Interface Icons

Interface Label

This label displays the interface (port) number.

Administrative Status Label

This label displays the status of this interface. Double-click this label to open the Interface Status view which allows you to view the operational state of that interface, and select the administrative status (enable or disable the port). Table 2-1lists the possible states and their descriptions.

Table 2-1. Administrative Status Label Descriptions

Color

Status

Description

 

 

 

Green

ON

Port is operational.

 

 

 

Blue

OFF

Port is off.

 

 

 

Yellow

TESTING

Port is in the test mode.

 

 

 

Interface Type Label

This label displays the interface type. Some of the possible interface types are Ethernet, FDDI, T1, PPP, and Reg1822.

MAC Address Label

This label displays the MAC address of this device. Double-click this label to open the Interface Address Translation table.

Interface Address Translation Table

This table cross-references device IP addresses to device MAC (Physical) addresses for selected nodes between networks. Double-click any column entry to open an address-speciÞc Address Translation Table Information view. The Interface Address Translation Table provides the following information:

Interface Index

A list of interfaces held by the device.

Physical Address

Displays the physical (MAC) address of the interface.

Device Views

Cisco Catalyst 5000/5500 Hub

2-4

Management Module Guide

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Cisco Catalyst 5000/5500 Hub Management Module Guide Virus Disclaimer Restricted Rights Notice Contents Chapter Event and Alarm Messages Index Cisco Catalyst 5000/5500 Hub Figures Viii Management Module Guide Tables Cisco Catalyst 5000/5500 Hub Chapter Description What Is in This GuideRelated Spectrum Documentation ConventionsExample, ConÞguration or Detail HelpOther Related Documentation Page Cisco Catalyst 5000/5500 Hubs What Is in This ChapterSpectrum Model Type Spectrum Model TypeUsing Double-Click Zones to Access Spectrum Views Accessing Spectrum ViewsUsing the Icon Subviews Menu to Access Spectrum Views Spectrum Views Roadmap Spectrum Views RoadmapPage Interface Device View Device ViewsOFF Interface Icon Interface IconsInterface Label Administrative Status LabelInterface Type Label MAC Address LabelGauge Label Network Information LabelNetwork Address Gauge Control Panel Interface Options PanelFind Network InformationGauge Control Panel Gauge ModeSelected Attribute Rates Gauge Mode Attributes and Corresponding Color SelectedKeep Settings ResetDefault Gauge TypeChassis Device View Module Icon Module IconsModule IdentiÞcation Port Icon Labels Module IdentiÞcation Labels and Click Zones Module Number LabelModule Table View Module Status LabelModule Versions Port Number Label Port IconsPort Status Label Port LabelPort Table View Period. No packets were transmitted and no collisions were Page Device ConÞguration Information Device ConÞguration ViewDevice Name Contact StatusInterface ConÞguration Table Last Change Interface ConÞguration ViewQueue Length Packet SizeCatalyst Stack System ConÞguration View Enable Redirects Insert ModeEnable Modem Enable RmonChassis Catalyst Stack Chassis Information ViewBackplane Possible System Types for the Cisco Catalyst 5000/5500Fan Power SuppliesCatalyst Stack Modules Table AlarmsSort On Catalyst Stack Ports TableOrder Possible Port Types DescriptionSTP Fddi Possible Port TypesSort On Device Events and Alarms Event and Alarm MessagesMessage in the Event Log Alarm View Probable Cause Message Catalyst Switch Events and Alarms9032208 E4 Event and Alarm Messages CsEvFormat/Event011c0006 CsEvFormat/Event011c0008 Page Common Applications Application ViewDevice Application View Device Application ViewDevice Application View Icon Mode Device Application View List Mode Opens the Catalyst VLan Manager , page 5-16 which Catalyst Stack ApplicationEnable IP Frag Enable RipEnable Spantree Enable Giant CheckCAM Aging Time CAM ModeIPX Snap To Ether IPX 8022 To EtherBRouter Ports Table Field DeÞnitions Community StringsColumn DeÞnition Heading Fddi Ring Table Community Strings View Access Levels DescriptionSMT Index AddressMAC Table Catalyst Filter TablesPort Protocol Table Vendor TableValue Port Table Test TableOffset MaskMonitor Information View Host Catalyst Tftp Information ViewFile Tftp Transfer Action TypesCatalyst VLan Table Catalyst Trap Receiver TableVLan Ports Table Switch LevelCatalyst VLan Manager VlanAdding a Vlan Selecting a VLanVlan Panel Changing a PortÕs Vlan Discovery ApplicationRemoving a Vlan Interface Discovery Status Table Discovery Cache Table ViewEthernet Application Numerics SymbolsIndex Cisco Catalyst 5000/5500 Hub Management Module Guide 9032208 E4 Index SMT Type 2-13,2-16,3-2,3-9,3-10,5-10,5-11,5- 12, 5-15,5-19 Index Cisco Catalyst 5000/5500 Hub Management Module Guide

5500, 5000, 5500 specifications

Cabletron Systems was a significant player in the networking equipment industry during the 1990s and early 2000s, and its 5500 and 5000 series switches are notable for their innovative design and features. The Cabletron 5500 series is best known for its high performance and reliability, targeting enterprises requiring robust networking solutions.

The Cabletron 5500 is a high-capacity switch often used in backbone network environments. One of its main features includes the ability to support multiple protocols, such as Ethernet, Token Ring, and FDDI. This versatility allows for seamless integration into diverse network infrastructures. Additionally, the 5500's architecture supports a high level of redundancy and fault tolerance, ensuring continuous network operation even in the event of component failures. With advanced Layer 2 and Layer 3 switching capabilities, the 5500 series excels in managing traffic efficiently, which is critical for high-demand applications.

The Cabletron 5000, while similar to the 5500, targets slightly less demanding network environments. It still offers significant features, including support for various networking standards, enabling easy compatibility with existing systems. The 5000 series is designed for scalability, allowing organizations to expand their networks without extensive overhauls. This switch is equipped with a user-friendly management interface, making it easier for network administrators to configure and monitor network performance.

Both series utilize Cabletron's patented FastPacket technology, which enhances packet processing speeds, leading to reduced latency in data transmission. This is especially beneficial for businesses with high data traffic volumes and real-time applications. Another key characteristic is the ability to prioritize traffic, which plays a vital role in Quality of Service (QoS) management, ensuring that critical applications receive the bandwidth they require.

Furthermore, the Cabletron 5500 and 5000 series switches are modular, allowing administrators to add or replace modules as needed. This modularity contributes to long-term investment protection, enabling organizations to adapt to evolving networking demands without the need for complete hardware replacements.

In summary, the Cabletron Systems 5500 and 5000 series represent a fusion of flexibility, speed, and reliability, positioning them as valuable assets in the networking landscape. Their features and capabilities support organizations of varying sizes in achieving efficient and dependable network performance.
Top Page Image Contents