Cabletron Systems 5000, 5500 manual Catalyst Stack System ConÞguration View

Page 43

Catalyst Stack System ConÞguration View

Packet Size

Displays the largest Maximum Transmission Unit (MTU) that can be transmitted or received by the port, measured in octets.

Queue Length

Displays the length of the outbound packet queue in packets.

Catalyst Stack System ConÞguration View

This view and its subviews provide device conÞguration information.

To access this view, do the following:

1.Within the Application view, highlight the CATStackApp icon (icon mode) or model type name (list mode).

2.From the Icon Subviews menu, select ConÞguration.

This view provides the following information:

Mgmt Type

Displays the type of network management running on the device. Possible management types include: ÒOtherÓ (none of the following), ÒsnmpV1Ó, ÒsmuxÓ (SNMP MUX sub-agent), and ÒsnmpV2V1Ó (bi-lingual SNMP).

Net Mask

Displays the subnet mask for the device.

Broadcast

Displays the broadcast address of the device.

Baud Rate

Displays the baud rate of the deviceÕs RS-232 port in bits per second.

Clear Mac Time

Displays the amount of time (in hundredths of a second) since the MAC counters were last cleared.

Clear MAC

Allows you to initiate the clearing of the MAC counters and to reset the Clear MAC value to zero.

Clear Port Time

Displays the amount of time, displayed in hundredths of a second, since the port counters were last cleared.

Clear Ports

Allows you to initiate the clearing of the port counters and to reset the Clear Port value to zero.

ConÞguration Views

Cisco Catalyst 5000/5500 Hub

3-4

Management Module Guide

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Cisco Catalyst 5000/5500 Hub Management Module Guide Virus Disclaimer Restricted Rights Notice Contents Chapter Event and Alarm Messages Index Cisco Catalyst 5000/5500 Hub Figures Viii Management Module Guide Tables Cisco Catalyst 5000/5500 Hub Chapter Description What Is in This GuideHelp ConventionsRelated Spectrum Documentation Example, ConÞguration or DetailOther Related Documentation Page Cisco Catalyst 5000/5500 Hubs What Is in This ChapterSpectrum Model Type Spectrum Model TypeUsing Double-Click Zones to Access Spectrum Views Accessing Spectrum ViewsUsing the Icon Subviews Menu to Access Spectrum Views Spectrum Views Roadmap Spectrum Views RoadmapPage Interface Device View Device ViewsOFF Interface Icon Interface IconsMAC Address Label Administrative Status LabelInterface Label Interface Type LabelGauge Label Network Information LabelNetwork Address Network Information Interface Options PanelGauge Control Panel FindGauge Control Panel Gauge ModeSelected Attribute Rates Gauge Mode Attributes and Corresponding Color SelectedGauge Type ResetKeep Settings DefaultChassis Device View Module Icon Module IconsModule IdentiÞcation Port Icon Labels Module IdentiÞcation Labels and Click Zones Module Number LabelModule Table View Module Status LabelModule Versions Port Label Port IconsPort Number Label Port Status LabelPort Table View Period. No packets were transmitted and no collisions were Page Contact Status Device ConÞguration ViewDevice ConÞguration Information Device NameInterface ConÞguration Table Packet Size Interface ConÞguration ViewLast Change Queue LengthCatalyst Stack System ConÞguration View Enable Rmon Insert ModeEnable Redirects Enable ModemChassis Catalyst Stack Chassis Information ViewBackplane Possible System Types for the Cisco Catalyst 5000/5500Fan Power SuppliesCatalyst Stack Modules Table AlarmsPossible Port Types Description Catalyst Stack Ports TableSort On OrderSTP Fddi Possible Port TypesSort On Device Events and Alarms Event and Alarm MessagesMessage in the Event Log Alarm View Probable Cause Message Catalyst Switch Events and Alarms9032208 E4 Event and Alarm Messages CsEvFormat/Event011c0006 CsEvFormat/Event011c0008 Page Common Applications Application ViewDevice Application View Device Application ViewDevice Application View Icon Mode Device Application View List Mode Opens the Catalyst VLan Manager , page 5-16 which Catalyst Stack ApplicationEnable Giant Check Enable RipEnable IP Frag Enable SpantreeIPX 8022 To Ether CAM ModeCAM Aging Time IPX Snap To EtherBRouter Ports Table Field DeÞnitions Community StringsColumn DeÞnition Heading Address Community Strings View Access Levels DescriptionFddi Ring Table SMT IndexMAC Table Catalyst Filter TablesPort Protocol Table Vendor TableValue Mask Test TablePort Table OffsetMonitor Information View Tftp Transfer Action Types Catalyst Tftp Information ViewHost FileCatalyst VLan Table Catalyst Trap Receiver TableVlan Switch LevelVLan Ports Table Catalyst VLan ManagerAdding a Vlan Selecting a VLanVlan Panel Changing a PortÕs Vlan Discovery ApplicationRemoving a Vlan Interface Discovery Status Table Discovery Cache Table ViewEthernet Application Numerics SymbolsIndex Cisco Catalyst 5000/5500 Hub Management Module Guide 9032208 E4 Index SMT Type 2-13,2-16,3-2,3-9,3-10,5-10,5-11,5- 12, 5-15,5-19 Index Cisco Catalyst 5000/5500 Hub Management Module Guide

5500, 5000, 5500 specifications

Cabletron Systems was a significant player in the networking equipment industry during the 1990s and early 2000s, and its 5500 and 5000 series switches are notable for their innovative design and features. The Cabletron 5500 series is best known for its high performance and reliability, targeting enterprises requiring robust networking solutions.

The Cabletron 5500 is a high-capacity switch often used in backbone network environments. One of its main features includes the ability to support multiple protocols, such as Ethernet, Token Ring, and FDDI. This versatility allows for seamless integration into diverse network infrastructures. Additionally, the 5500's architecture supports a high level of redundancy and fault tolerance, ensuring continuous network operation even in the event of component failures. With advanced Layer 2 and Layer 3 switching capabilities, the 5500 series excels in managing traffic efficiently, which is critical for high-demand applications.

The Cabletron 5000, while similar to the 5500, targets slightly less demanding network environments. It still offers significant features, including support for various networking standards, enabling easy compatibility with existing systems. The 5000 series is designed for scalability, allowing organizations to expand their networks without extensive overhauls. This switch is equipped with a user-friendly management interface, making it easier for network administrators to configure and monitor network performance.

Both series utilize Cabletron's patented FastPacket technology, which enhances packet processing speeds, leading to reduced latency in data transmission. This is especially beneficial for businesses with high data traffic volumes and real-time applications. Another key characteristic is the ability to prioritize traffic, which plays a vital role in Quality of Service (QoS) management, ensuring that critical applications receive the bandwidth they require.

Furthermore, the Cabletron 5500 and 5000 series switches are modular, allowing administrators to add or replace modules as needed. This modularity contributes to long-term investment protection, enabling organizations to adapt to evolving networking demands without the need for complete hardware replacements.

In summary, the Cabletron Systems 5500 and 5000 series represent a fusion of flexibility, speed, and reliability, positioning them as valuable assets in the networking landscape. Their features and capabilities support organizations of varying sizes in achieving efficient and dependable network performance.
Top Page Image Contents