Cabletron Systems 5000, 5500 manual Catalyst Stack Modules Table, Alarms

Page 48

Catalyst Stack System ConÞguration View

Catalyst Stack Modules Table

Alarms

The Alarms portion of the Chassis Information view provides information about any physical status alarms detected for the device. Possible alarm states for each of the Þelds listed below are Off and On.

Temp

Displays the current status of the temperature alarm for this device.

Minor

Displays the current status of the minor alarms for this device.

Major

Displays the current status of the major alarms for this device.

Catalyst Stack Modules Table

This table provides module identiÞcation information. To access the Catalyst Stack Modules table, click the Modules button in the Catalyst Stack System ConÞguration view. Double-click any table entry to access the Catalyst Stack Module Table view for that entry. The Catalyst Stack Modules table provides the following information for each module:

Index

Displays the slot number in which this module is inserted in the chassis. Valid entries are 1 to the maximum number of slots in this chassis.

Type

Displays the type of module.

Serial Nbr

Displays the serial number for this module.

Status

Displays the current status of this module. Table 3-3shows the possible states.

Table 3-3. Module Status Descriptions

Color

Status

Description

 

 

 

Blue

Other

None of the following

 

 

 

Green

OK

Status is ok

 

 

 

Yellow

MinorFault

Minor problem

 

 

 

Red

MajorFault

Major problem

 

 

 

Name

Displays the user-deÞned or default model name for this module.

9032208 E4

ConÞguration Views

 

3-9

Image 48
Contents Cisco Catalyst 5000/5500 Hub Management Module Guide Virus Disclaimer Restricted Rights Notice Contents Chapter Event and Alarm Messages Index Cisco Catalyst 5000/5500 Hub Figures Viii Management Module Guide Tables Cisco Catalyst 5000/5500 Hub What Is in This Guide Chapter DescriptionConventions Related Spectrum DocumentationExample, ConÞguration or Detail HelpOther Related Documentation Page What Is in This Chapter Cisco Catalyst 5000/5500 HubsSpectrum Model Type Spectrum Model TypeAccessing Spectrum Views Using Double-Click Zones to Access Spectrum ViewsUsing the Icon Subviews Menu to Access Spectrum Views Spectrum Views Roadmap Spectrum Views RoadmapPage Device Views Interface Device ViewOFF Interface Icons Interface IconAdministrative Status Label Interface LabelInterface Type Label MAC Address LabelNetwork Information Label Gauge LabelNetwork Address Interface Options Panel Gauge Control PanelFind Network InformationGauge Mode Gauge Control PanelRates Gauge Mode Attributes and Corresponding Color Selected Selected AttributeReset Keep SettingsDefault Gauge TypeChassis Device View Module Icons Module IconModule IdentiÞcation Port Icon Labels Module Number Label Module IdentiÞcation Labels and Click ZonesModule Status Label Module Table ViewModule Versions Port Icons Port Number LabelPort Status Label Port LabelPort Table View Period. No packets were transmitted and no collisions were Page Device ConÞguration View Device ConÞguration InformationDevice Name Contact StatusInterface ConÞguration Table Interface ConÞguration View Last ChangeQueue Length Packet SizeCatalyst Stack System ConÞguration View Insert Mode Enable RedirectsEnable Modem Enable RmonCatalyst Stack Chassis Information View ChassisPossible System Types for the Cisco Catalyst 5000/5500 BackplanePower Supplies FanAlarms Catalyst Stack Modules TableCatalyst Stack Ports Table Sort OnOrder Possible Port Types DescriptionPossible Port Types STP FddiSort On Event and Alarm Messages Device Events and AlarmsCatalyst Switch Events and Alarms Message in the Event Log Alarm View Probable Cause Message9032208 E4 Event and Alarm Messages CsEvFormat/Event011c0006 CsEvFormat/Event011c0008 Page Application View Common ApplicationsDevice Application View Device Application ViewDevice Application View Icon Mode Device Application View List Mode Catalyst Stack Application Opens the Catalyst VLan Manager , page 5-16 whichEnable Rip Enable IP FragEnable Spantree Enable Giant CheckCAM Mode CAM Aging TimeIPX Snap To Ether IPX 8022 To EtherCommunity Strings BRouter Ports Table Field DeÞnitionsColumn DeÞnition Heading Community Strings View Access Levels Description Fddi Ring TableSMT Index AddressCatalyst Filter Tables MAC TablePort Vendor Table Protocol TableValue Test Table Port TableOffset MaskMonitor Information View Catalyst Tftp Information View HostFile Tftp Transfer Action TypesCatalyst Trap Receiver Table Catalyst VLan TableSwitch Level VLan Ports TableCatalyst VLan Manager VlanSelecting a VLan Adding a VlanVlan Panel Discovery Application Changing a PortÕs VlanRemoving a Vlan Discovery Cache Table View Interface Discovery Status TableEthernet Application Symbols NumericsIndex Cisco Catalyst 5000/5500 Hub Management Module Guide 9032208 E4 Index SMT Type 2-13,2-16,3-2,3-9,3-10,5-10,5-11,5- 12, 5-15,5-19 Index Cisco Catalyst 5000/5500 Hub Management Module Guide

5500, 5000, 5500 specifications

Cabletron Systems was a significant player in the networking equipment industry during the 1990s and early 2000s, and its 5500 and 5000 series switches are notable for their innovative design and features. The Cabletron 5500 series is best known for its high performance and reliability, targeting enterprises requiring robust networking solutions.

The Cabletron 5500 is a high-capacity switch often used in backbone network environments. One of its main features includes the ability to support multiple protocols, such as Ethernet, Token Ring, and FDDI. This versatility allows for seamless integration into diverse network infrastructures. Additionally, the 5500's architecture supports a high level of redundancy and fault tolerance, ensuring continuous network operation even in the event of component failures. With advanced Layer 2 and Layer 3 switching capabilities, the 5500 series excels in managing traffic efficiently, which is critical for high-demand applications.

The Cabletron 5000, while similar to the 5500, targets slightly less demanding network environments. It still offers significant features, including support for various networking standards, enabling easy compatibility with existing systems. The 5000 series is designed for scalability, allowing organizations to expand their networks without extensive overhauls. This switch is equipped with a user-friendly management interface, making it easier for network administrators to configure and monitor network performance.

Both series utilize Cabletron's patented FastPacket technology, which enhances packet processing speeds, leading to reduced latency in data transmission. This is especially beneficial for businesses with high data traffic volumes and real-time applications. Another key characteristic is the ability to prioritize traffic, which plays a vital role in Quality of Service (QoS) management, ensuring that critical applications receive the bandwidth they require.

Furthermore, the Cabletron 5500 and 5000 series switches are modular, allowing administrators to add or replace modules as needed. This modularity contributes to long-term investment protection, enabling organizations to adapt to evolving networking demands without the need for complete hardware replacements.

In summary, the Cabletron Systems 5500 and 5000 series represent a fusion of flexibility, speed, and reliability, positioning them as valuable assets in the networking landscape. Their features and capabilities support organizations of varying sizes in achieving efficient and dependable network performance.