Cabletron Systems 5000, 5500 manual Possible Attach Types DeÞnition, Insert Mode, TrafÞc

Page 44

Catalyst Stack System ConÞguration View

Attach Type

This button allows you to change the attachment type of the FDDI connection to the device. Table 3-1shows the possible attachment types. New attach type settings will not take effect until the concentrator is reset.

Table 3-1. Possible Attach Types

Attach Type

DeÞnition

 

 

Other

None of the following.

 

 

DualAttach

The Þrst FDDI port is conÞgured as an A port,

 

the second as a B port.

 

 

SingleAttach

The Þrst FDDI port is conÞgured as an S port,

 

the second as an M port.

 

 

NullAttach

The Þrst two FDDI ports are conÞgured as M

 

ports.

 

 

Insert Mode

This button allows you to select the mode for inserting M-ports into the concentrator ring. Possible insertion modes are: Other (none of the following), Standard, Scheduled, and Graceful.

Reset

This button allows you to initiate a reset of the control logic of all modules in the device. The default is Other.

TrafÞc

Displays the value of the trafÞc meter, shown as a percentage of bandwidth utilization on the network for the previous polling interval.

Enable Redirects

Allows you to select whether the device is able to send or receive ICMP redirect messages.

Enable Modem

Allows you to select whether this deviceÕs RS-232 port modem control lines are enabled or disabled.

Enable Rmon

Allows you to select whether this SNMP agent supports the RMON MIB.

9032208 E4

ConÞguration Views

 

3-5

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Cisco Catalyst 5000/5500 Hub Management Module Guide Virus Disclaimer Restricted Rights Notice Contents Chapter Event and Alarm Messages Index Cisco Catalyst 5000/5500 Hub Figures Viii Management Module Guide Tables Cisco Catalyst 5000/5500 Hub What Is in This Guide Chapter DescriptionConventions Related Spectrum DocumentationExample, ConÞguration or Detail HelpOther Related Documentation Page What Is in This Chapter Cisco Catalyst 5000/5500 HubsSpectrum Model Type Spectrum Model TypeAccessing Spectrum Views Using Double-Click Zones to Access Spectrum ViewsUsing the Icon Subviews Menu to Access Spectrum Views Spectrum Views Roadmap Spectrum Views RoadmapPage Device Views Interface Device ViewOFF Interface Icons Interface IconAdministrative Status Label Interface LabelInterface Type Label MAC Address LabelNetwork Address Network Information LabelGauge Label Interface Options Panel Gauge Control PanelFind Network InformationGauge Mode Gauge Control PanelRates Gauge Mode Attributes and Corresponding Color Selected Selected AttributeReset Keep SettingsDefault Gauge TypeChassis Device View Module IdentiÞcation Port Icon Labels Module IconsModule Icon Module Number Label Module IdentiÞcation Labels and Click ZonesModule Module Status LabelModule Table View Versions Port Icons Port Number LabelPort Status Label Port LabelPort Table View Period. No packets were transmitted and no collisions were Page Device ConÞguration View Device ConÞguration InformationDevice Name Contact StatusInterface ConÞguration Table Interface ConÞguration View Last ChangeQueue Length Packet SizeCatalyst Stack System ConÞguration View Insert Mode Enable RedirectsEnable Modem Enable RmonCatalyst Stack Chassis Information View ChassisPossible System Types for the Cisco Catalyst 5000/5500 BackplanePower Supplies FanAlarms Catalyst Stack Modules TableCatalyst Stack Ports Table Sort OnOrder Possible Port Types DescriptionPossible Port Types STP FddiSort On Event and Alarm Messages Device Events and AlarmsCatalyst Switch Events and Alarms Message in the Event Log Alarm View Probable Cause Message9032208 E4 Event and Alarm Messages CsEvFormat/Event011c0006 CsEvFormat/Event011c0008 Page Application View Common ApplicationsDevice Application View Device Application ViewDevice Application View Icon Mode Device Application View List Mode Catalyst Stack Application Opens the Catalyst VLan Manager , page 5-16 whichEnable Rip Enable IP FragEnable Spantree Enable Giant CheckCAM Mode CAM Aging TimeIPX Snap To Ether IPX 8022 To EtherColumn DeÞnition Heading Community StringsBRouter Ports Table Field DeÞnitions Community Strings View Access Levels Description Fddi Ring TableSMT Index AddressPort Catalyst Filter TablesMAC Table Value Vendor TableProtocol Table Test Table Port TableOffset MaskMonitor Information View Catalyst Tftp Information View HostFile Tftp Transfer Action TypesCatalyst Trap Receiver Table Catalyst VLan TableSwitch Level VLan Ports TableCatalyst VLan Manager VlanVlan Panel Selecting a VLanAdding a Vlan Removing a Vlan Discovery ApplicationChanging a PortÕs Vlan Discovery Cache Table View Interface Discovery Status TableEthernet Application Symbols NumericsIndex Cisco Catalyst 5000/5500 Hub Management Module Guide 9032208 E4 Index SMT Type 2-13,2-16,3-2,3-9,3-10,5-10,5-11,5- 12, 5-15,5-19 Index Cisco Catalyst 5000/5500 Hub Management Module Guide

5500, 5000, 5500 specifications

Cabletron Systems was a significant player in the networking equipment industry during the 1990s and early 2000s, and its 5500 and 5000 series switches are notable for their innovative design and features. The Cabletron 5500 series is best known for its high performance and reliability, targeting enterprises requiring robust networking solutions.

The Cabletron 5500 is a high-capacity switch often used in backbone network environments. One of its main features includes the ability to support multiple protocols, such as Ethernet, Token Ring, and FDDI. This versatility allows for seamless integration into diverse network infrastructures. Additionally, the 5500's architecture supports a high level of redundancy and fault tolerance, ensuring continuous network operation even in the event of component failures. With advanced Layer 2 and Layer 3 switching capabilities, the 5500 series excels in managing traffic efficiently, which is critical for high-demand applications.

The Cabletron 5000, while similar to the 5500, targets slightly less demanding network environments. It still offers significant features, including support for various networking standards, enabling easy compatibility with existing systems. The 5000 series is designed for scalability, allowing organizations to expand their networks without extensive overhauls. This switch is equipped with a user-friendly management interface, making it easier for network administrators to configure and monitor network performance.

Both series utilize Cabletron's patented FastPacket technology, which enhances packet processing speeds, leading to reduced latency in data transmission. This is especially beneficial for businesses with high data traffic volumes and real-time applications. Another key characteristic is the ability to prioritize traffic, which plays a vital role in Quality of Service (QoS) management, ensuring that critical applications receive the bandwidth they require.

Furthermore, the Cabletron 5500 and 5000 series switches are modular, allowing administrators to add or replace modules as needed. This modularity contributes to long-term investment protection, enabling organizations to adapt to evolving networking demands without the need for complete hardware replacements.

In summary, the Cabletron Systems 5500 and 5000 series represent a fusion of flexibility, speed, and reliability, positioning them as valuable assets in the networking landscape. Their features and capabilities support organizations of varying sizes in achieving efficient and dependable network performance.
Top Page Image Contents