Cabletron Systems manual Chapter Installation, Unpacking the HSIM-W85

Page 23

CHAPTER 2

INSTALLATION

To install the HSIM-W85 the following items are required:

Antistatic wrist strap (shipped with the HSIM-W85)

Phillips screwdriver

NOTE

Before attempting to use the HSIM-W85 you should be familiar with the IEEE 802.3 Specifications,and T1 Networking.

2.1UNPACKING THE HSIM-W85

!

CAUTION

The HSIM-W85 and the host platform are sensitive to static discharges. Use an antistatic strap and observe all static precautions during this procedure. Failure to do so could result in damage to the HSIM-W85 or host platform.

Unpack the HSIM-W85 as follows:

1.Remove the HSIM-W85 from the shipping box.

2.Leave the module in its antistatic bag until you are ready to install it.

3.Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package for proper use).

4.After removing the module from its antistatic bag, visually inspect the device. If you notice any signs of damage, contact Cabletron Systems immediately. Refer to Section 1.8 for instructions. Save the antistatic bag in the event the module must be reshipped or relocated.

HSIM-W85 User’s Guide

2-1

Image 23
Contents HSIM-W85 Page HSIM-W85 User’s Guide FCC Notice Vcci Notice HSIM-W85 User’s Guide HSIM-W85 User’s Guide Cabletron Systems Limited Program License Agreement HSIM-W85 User’s Guide Vii Viii HSIM-W85 User’s Guide Contents Contents Important Notice Chapter IntroductionFirmware Revision Using this Manual Imux OverviewData Flow in the HSIM-W85 FeaturesHdlc ConnectivityPriority Queuing Inverse Multiplexing ImuxSnmp and MIB Support 5 DS1 AlarmLanview Diagnostic LEDs Following conventions are used throughout this document Document ConventionsRelated Documentation Related DocumentationYour email address Getting HelpUnpacking the HSIM-W85 Chapter InstallationInstalling the HSIM-W85 in an Interface Module Installing the HSIM-W85Installing the HSIM-W85 Installing the HSIM-W85 Installing the HSIM-W85 in a Standalone Device Figure B-3 HSIM-W85 Cable Connection Connecting the HSIM-W85 to the NetworkLanview Leds ChapterLanview LEDs Local Management Chapter ManagementManagement Network Tools Commands Network Tools Help Screen Command Imux Built-in CommandsExample Wanpq WanpqSyntax ds1alarm Ds1alarmDsx1 Ds1alarmDsx1 Syntax ds1ext Ds1extDone, quit, exit Special Commands3shows the imux setup for group id 1 so far Sample Imux ConfigurationEnabling the Imux Group Sample Imux Configuration Management HSIM-W85 User’s Guide Hardware Troubleshooting Chapter TroubleshootingTroubleshooting the HSIM-W85 Status S LED is OFF Problems with the Firmware Image Investigating Software Configuration ProblemsHSIM-W85 User’s Guide Physical Properties Appendix a SpecificationsRegulatory Compliance Environmental RequirementsAppendix B Typical Configuration Appendix B Typical Configuration Port ID Appendix C FCC Part 68 USER’S InformationAppendix C FCC Part 68 User’s Information Being duly sworn, state My commission expires

W85 specifications

Cabletron Systems W85 is a prominent networking solution that was developed to support the burgeoning demand for high-performance data communications in the enterprise environment. As an advanced multi-layer switch, the W85 effectively integrates various networking technologies, offering robust support for both wired and wireless connectivity, making it particularly suitable for complex network infrastructures.

One of the standout features of the W85 is its scalability. Designed to grow with the needs of a business, the W85 can accommodate an increasing number of users and devices without sacrificing performance. This is essential in today's digital workspace, where employees and equipment are continually being added to the network.

The W85 operates across multiple layers of the OSI model, offering Layer 2 and Layer 3 switching capabilities. Layer 2 functionalities enable efficient Ethernet switching and VLAN support, ensuring that data can move swiftly within local networks. Meanwhile, its Layer 3 capabilities facilitate dynamic routing, allowing for intelligent data distribution across different network segments. This dual functionality enhances the W85's versatility, making it suitable for both small and large-scale deployments.

Equipped with advanced security features, the Cabletron W85 places a strong emphasis on network integrity. It supports comprehensive security protocols that help to mitigate potential threats. Features such as Access Control Lists (ACLs) allow administrators to define and enforce security policies, ensuring that only authorized users have access to sensitive data. Furthermore, the device supports advanced encryption methods to protect data in transit, which is crucial for safeguarding information in modern enterprises.

The W85 is also notable for its management capabilities. It provides an intuitive web-based interface for system administrators, simplifying the configuration and monitoring processes. With support for SNMP (Simple Network Management Protocol), administrators can efficiently manage network devices and receive alerts for potential issues before they escalate into significant problems.

In terms of connectivity, the Cabletron W85 features multiple Gigabit Ethernet ports designed to handle high-speed data transfer. This allows for seamless integration with existing infrastructure while ensuring that performance remains high even under heavy loads. The device is also compatible with various network management protocols, positioning it as a streamlined component in any enterprise’s networking strategy.

The Cabletron Systems W85 embodies the future of enterprise networking with its combination of scalability, security features, and robust management tools, ensuring it remains a relevant choice for organizations looking to enhance their networking capabilities.