Cabletron Systems manual Installing the HSIM-W85 in an Interface Module

Page 24

Chapter 2: Installation

2.2INSTALLING THE HSIM-W85

Only qualified personnel should install or service this unit.

An HSIM-W85 can be installed in any Cabletron Systems device that supports HSIM technology (e.g., 2H252-25R, 2E42-27, 6E132-25).

NOTE

Refer to the release notes for the version of firmware running on the Cabletron Systems host platform to ensure that the HSIM-W85 is supported.

The following subsections provide instructions for installing an HSIM-W85 in a host platform. Refer to the specific interface module or standalone device manual for exact HSIM slot and connector locations.

2.2.1Installing the HSIM-W85 in an Interface Module

To install an HSIM-W85 in an interface module that supports HSIM technology, perform the following steps.

1.Note the ports of the interface module that have cables attached to them. Write down the ports and label the cables to make it easier to reattach the network properly after the installation. Then disconnect those cables from the ports.

2.Attach the antistatic wrist strap (refer to the instructions outlined on the antistatic wrist strap package).

3.If the interface module is installed in a chassis, unlock the top and bottom plastic locking tabs of the module faceplate.

4.Remove the module from the chassis, and place it down flat with the internal components facing up.

5.Remove and save the two faceplate mounting screws securing the HSIM coverplate and remove the coverplate. See Figure 2-1.

2-2

HSIM-W85 User’s Guide

Image 24
Contents HSIM-W85 Page HSIM-W85 User’s Guide FCC Notice Vcci Notice HSIM-W85 User’s Guide HSIM-W85 User’s Guide Cabletron Systems Limited Program License Agreement HSIM-W85 User’s Guide Vii Viii HSIM-W85 User’s Guide Contents Contents Chapter Introduction Firmware RevisionImportant Notice Using this Manual Overview ImuxFeatures Data Flow in the HSIM-W85Connectivity HdlcInverse Multiplexing Imux Priority Queuing5 DS1 Alarm Lanview Diagnostic LEDsSnmp and MIB Support Document Conventions Following conventions are used throughout this documentRelated Documentation Related DocumentationGetting Help Your email addressChapter Installation Unpacking the HSIM-W85Installing the HSIM-W85 Installing the HSIM-W85 in an Interface ModuleInstalling the HSIM-W85 Installing the HSIM-W85 Installing the HSIM-W85 in a Standalone Device Connecting the HSIM-W85 to the Network Figure B-3 HSIM-W85 Cable ConnectionChapter Lanview LedsLanview LEDs Chapter Management Local ManagementManagement Network Tools Commands Network Tools Help Screen Command Built-in Commands ImuxExample Wanpq WanpqDs1alarm Syntax ds1alarmDs1alarm Dsx1Dsx1 Ds1ext Syntax ds1extSpecial Commands Done, quit, exitSample Imux Configuration 3shows the imux setup for group id 1 so farEnabling the Imux Group Sample Imux Configuration Management HSIM-W85 User’s Guide Chapter Troubleshooting Troubleshooting the HSIM-W85Hardware Troubleshooting Status S LED is OFF Investigating Software Configuration Problems Problems with the Firmware ImageHSIM-W85 User’s Guide Appendix a Specifications Physical PropertiesEnvironmental Requirements Regulatory ComplianceAppendix B Typical Configuration Appendix B Typical Configuration Appendix C FCC Part 68 USER’S Information Port IDAppendix C FCC Part 68 User’s Information Being duly sworn, state My commission expires

W85 specifications

Cabletron Systems W85 is a prominent networking solution that was developed to support the burgeoning demand for high-performance data communications in the enterprise environment. As an advanced multi-layer switch, the W85 effectively integrates various networking technologies, offering robust support for both wired and wireless connectivity, making it particularly suitable for complex network infrastructures.

One of the standout features of the W85 is its scalability. Designed to grow with the needs of a business, the W85 can accommodate an increasing number of users and devices without sacrificing performance. This is essential in today's digital workspace, where employees and equipment are continually being added to the network.

The W85 operates across multiple layers of the OSI model, offering Layer 2 and Layer 3 switching capabilities. Layer 2 functionalities enable efficient Ethernet switching and VLAN support, ensuring that data can move swiftly within local networks. Meanwhile, its Layer 3 capabilities facilitate dynamic routing, allowing for intelligent data distribution across different network segments. This dual functionality enhances the W85's versatility, making it suitable for both small and large-scale deployments.

Equipped with advanced security features, the Cabletron W85 places a strong emphasis on network integrity. It supports comprehensive security protocols that help to mitigate potential threats. Features such as Access Control Lists (ACLs) allow administrators to define and enforce security policies, ensuring that only authorized users have access to sensitive data. Furthermore, the device supports advanced encryption methods to protect data in transit, which is crucial for safeguarding information in modern enterprises.

The W85 is also notable for its management capabilities. It provides an intuitive web-based interface for system administrators, simplifying the configuration and monitoring processes. With support for SNMP (Simple Network Management Protocol), administrators can efficiently manage network devices and receive alerts for potential issues before they escalate into significant problems.

In terms of connectivity, the Cabletron W85 features multiple Gigabit Ethernet ports designed to handle high-speed data transfer. This allows for seamless integration with existing infrastructure while ensuring that performance remains high even under heavy loads. The device is also compatible with various network management protocols, positioning it as a streamlined component in any enterprise’s networking strategy.

The Cabletron Systems W85 embodies the future of enterprise networking with its combination of scalability, security features, and robust management tools, ensuring it remains a relevant choice for organizations looking to enhance their networking capabilities.