Chapter 2: Installation
5.Refer back to Figure 2-1 and remove the two faceplate mounting screws and the VHSIM coverplate. Save the screws.
6.Refer back to Figure 2-2 and place the VHSIM-G02 module behind the standalone device faceplate.
7.Align the VHSIM-G02 connectors with the pins on the standalone device.
When inserting the VHSIM-G02 onto the device pins, ensure
!that the pins do not bend, as this can damage both the device
CAUTION | and the VHSIM-G02. |
|
8.Press down firmly on the VHSIM-G02 until the connectors slide all the way onto the pins. Ensure that the standoffs on the standalone device align with the standoff screw holes on the VHSIM-G02.
9.Secure the VHSIM-G02 to the device faceplate using the mounting screws saved in step 5.
10.Secure the VHSIM-G02 to the device standoffs using the standoff screws shipped with the VHSIM-G02.
Ensure that the chassis cover is in place before reconnecting the power cord.
11.Reattach the chassis cover to the standalone device, reconnect the power cord, and reconnect the standalone device to the network.
2-6 | VHSIM-G02 User’s Guide |