Cabletron Systems STH-24 manual Management Information Base MIB Support

Page 10

Introduction

NOTE

Management Information Base (MIB) Support

The 9T122-24 module provides MIB support including:

•IETF MIB II (RFC 1213)

•IETF RMON MIB (RFC 1271 and 1513)

•IETF Bridge MIBs (RFC 1493 and 1525)

•IEEE 802.5 Token Ring MIB (RFC 1231)

•Cabletron Enterprise MIBs

For a complete list of supported MIBs, refer to the release notes provided in the module package.

Ring Security

This feature prevents unauthorized stations from attaching to the ring. Using Local or Remote Management, the module may be configured as to which MAC addresses are allowed to operate on the ring.

Multi-Ring Out Capability

With this feature any port of the module may be configured as a ring-out port through management software. In this configuration a stand-alone passive concentrator (such as an IBM 8228 MAU) may be added to the ring.

Telnet

A telnet session can be set up with the module to provide access to the Local Management screens.

LANVIEW LEDs

The 9T122-24 use LANVIEW – the Cabletron Systems built-in visual diagnostic and status monitoring system. With LANVIEW LEDs, you can quickly identify the device, port, and physical layer status at a glance.

Hot Swapping

The 9T122-24 can be installed or removed from the chassis while the SmartSwitch 9000 is powered up without affecting the operation of the remaining modules in the chassis.

1-2

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SmartSwitch 9T122-24 User’s Guide Page Page Vcci Notice FCC NoticeDOC Notice Declaration of Conformity Addendum Page Contents Contents Features IntroductionManagement Information Base MIB Support 9T122-24 MicroLAN Module Related Manuals Getting HelpInstallation Installing the MicroLAN ModuleInstallation Reset Switch Reset SwitchUser-Accessible Components SMB-1 PromSetting the Module Card DIP Switch Location of Module DIP SwitchRing Speed See the Cautions at the end of this tableUsing a Ring-Out Port Multi-Ring Out CapabilityInstallation T122-24 Block Diagram OperationBridging Transparent BridgingSource Route Bridging Flexible Network Bus FNB System Management BusesFNB Interface System Diagnostic ControllerDC/DC Converter I960 CoreOperation Lanview LEDs Lanview LEDsFunctions of the FNB receive LED are listed in Table Functions of the Link LED are listed in Table Function of the Token Ring speed LEDs is listed in Table Service SafetySpecifications Physical Electrical
Top Page Image Contents