Selecting the Port Administrative Status
8.3SELECTING THE PORT ADMINISTRATIVE STATUS
To select the bridge port administrative status, perform the following steps:
1.Use the arrow keys to highlight the [BRIDGE_PORT X] field.
2.Press SPACE bar or BACKSPACE to select the bridge port you want to configure. The selected bridge port appears in the Bridge Port Admin Status field.
3.Use the arrow keys to highlight the BRIDGE PORT ADMIN STATUS: PORT XX - - > ALL PORTS [ENABLED] field.
4.Press SPACE bar or BACKSPACE to select ENABLE or DISABLE.
For example, the following bridge setup indicates that bridge port 01 is configured to bridge traffic to all ports:
BRIDGE PORT ADMIN STATUS: PORT 01 - - > ALL PORTS
[ENABLED]
5.Use the arrow keys to highlight the SAVE command field.
6.Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.
| Page |