Cabletron Systems Dec GigaSwitch manual Module Configuration View, Interface Configuration Table

Module Configuration View

Interface Configuration Table

clicking on one of the entries in the Interface Address Translation Table access the Address Translation Table Information View. This view allows you to enter information about a new interface to be included in the Interface Address Translation Table or to edit the information for an existing entry.

Interface Configuration Table

The Interface Configuration Table displays information regarding the interfaces attached to the GigaSwitch. The table headings and their descriptions are Index, Description, Type, Bandwidth, Physical Address and Operation Status. Double-clicking on one of the entries in the Interface Configuration Table accesses the Interface Configuration View, which allows you to change the Administrative Status for the interface to On, Off, or Testing.The Interface Configuration view also includes a Device Banner for the GigaSwitch and the Operation Status, Last Change, Physical Address, Bandwidth, Packet Size and Queue Length for the selected interface.

Module Configuration View

Access the Module Configuration View by doing the following:

1.Access the DEC GigaSwitch Logical Device View via the Icon Subviews menu.

2.Highlight the appropriate module.

3.Select Module Configuration for the Icon Subviews menu, which will call the Board Table View.

Board Table View

The Board Table View allows you to change the status for the highlighted module. Possible configuration choices are NotPresent, PowerDown, PowerUp, PowerDownThenUp, Fault, RevMismatch, and SelfTestInProgress. The Board Table View also displays the Index number, Type, Hardware Rev, and Firmware Rev of the highlighted module.

9031754 E5	Configuration Views
	3-3