vSystem Name (System Administrator Aid)
This is the name given to the system and is used when reporting problem messages.
Note: Knowing the system name aids the support team in quickly identifying the
location, configuration, history, and so on of your system.
You can access this service aid directly from theAIX command line, by typing:
/usr/lpp/diagnostics/bin/uspchrp -m
Configure Ring Indicate Power-On Policy
Note: This service aid runs on CHRP system units only.
This service aid allows the user to power-on a system by telephone from a remote
location. If the system is powered off, and Ring Indicate Power On is enabled, the
system powers on at a predetermined number of rings. If the system is already on, no
action is taken. In either case, the telephone call is not answered, and the caller
receives no feedback that the system has powered on.
Use this service aid to display and change the following settings for the Ring Indicate
Power-On Policy:
Note: Because of system capability, some of the following settings might not be
displayed by this service aid.
vPower On Via Ring Indicate (on/off)
vNumber of Rings Before Power On
You can access this service aid directly from theAIX command line, by typing:
/usr/lpp/diagnostics/bin/uspchrp -r
104 Eserver pSeries 690 User’s Guide