Display Software Product Data
This task uses SMIT to display information about the installed software and provides
the following functions:
vList Installed Software
vList Applied but Not Committed Software Updates
vShow Software Installation History
vShow Fix (APAR) Installation Status
vList Fileset Requisites
vList Fileset Dependents
vList Files Included in a Fileset
vList File Owner by Fileset
Display System Environmental Sensors
Note: This service aid runs on CHRP system units only.
This service aid displays the environmental sensors implemented on a CHRP system.
The information displayed is the sensor name, physical location code, literal value of
the sensor status, and the literal value of the sensor reading.
The sensor status can be any one of the following:
vNormal - The sensor reading is within the normal operating range.
vCritical High - The sensor reading indicates a serious problem with the device. Run
diagnostics on sysplanar0 to determine what repair action is needed.
vCritical Low - The sensor reading indicates a serious problem with the device. Run
diagnostics on sysplanar0 to determine what repair action is needed.
vWarning High - The sensor reading indicates a problem with the device. This could
become a critical problem if action is not taken. Run diagnostics on sysplanar0 to
determine what repair action is needed.
vWarning Low - The sensor reading indicates a problem with the device. This could
become a critical problem if action is not taken. Run diagnostics on sysplanar0 to
determine what repair action is needed.
vHardware Error - The sensor could not be read because of a hardware error. Run
diagnostics on sysplanar0 in problem-determination mode to determine what repair
action is needed.
vHardware Busy - The system has repeatedly returned a busy indication, and a
reading is not available. Try the service aid again. If the problem continues, run
diagnostics on sysplanar0 in problem-determination mode to determine what repair
action is needed.
This service aid can also be run as a command. You can use the command to list the
sensors and their values in a text format, list the sensors and their values in numerical
format, or a specific sensor can be queried to return either the sensor status or sensor
value.
Chapter 6. Introduction to Tasksand Service Aids 11 3