Avenview FO-DVI-XX-MM Power Consumption and DDC Power Requirements, Description ’ty Material

Item	Description	Q’ty	Material
A	DVI-D Single Link 18 Plug	2	Glass filled thermoplastic UL94V-0
B	DVI Case-Top, Bottom	2	Glass filled PC UL94V-0
C	DVI Thumb Screw	4	SUM 24L+ABS
D	Stopper	2	PVC 55%
E	Epoxy Printed Circuit Board for Tx	1	FR-4, 1.5t UL94V-0
F	Optical Connector for VCSEL,PD	2	PA46 UL94V-0 + C5210
G	Optical Connector for fiber	2	PA46 UL94V-0
H	Epoxy Printed Circuit Board for Rx	1	FR-4, 1.5t UL94V-0
I	Vertical Surface Emitting Laser Diode	4	GaAs
J	Photo Detector	4	GaAs
K	4 fiber 5 copper DVI Optic Cable	1	See Section 4
L	4 fiber DVI Optic Cable	1	See Section 4
M	Label	4	Polyester-matte 3.3mil
N	DC Power Jack	2	Polyamide 6/6
O	DC Power Adaptor	1	E191362 (UL No)

2.2 Power Consumption and DDC Power Requirements

Power consumption of FO-DVI-xx-MM Transmitter and Receiver Module

Item	Typical	maximum	units
Transmitter	0.4	0.53	Watt
Receiver	0.5	0.56	Watt

Transmitter module of FO-DVI-XX-MM without external power supply is operated by drawing out power for DDC from the computer and receiver module of FO-DVI-XX-MM cable also utilize the DDC power delivered via copper wire.

If graphic board of the computer does not supply over 0.6A, 5V, FO-DVI-XX-MM cable may not operate normally.

www.avenview.com 10