Avenview FO-DVI-XX-MM specifications Model Description, Package Contents, Before Installation

Page 6

1.5Model Description

FO-DVI-XX-MM

Model Name

Length in Meters (5 = 5 meters, 10 = 10 meters)

1.6Package Contents

Before you start the installation of the converter, please check the package contents.

-DVI Optical Cable with Receiver and Transmitter

-User’s Manual

1.7Before Installation

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents FO-DVI-XX-MM Series Table of Contents Page Important Safeguards Getting StartedSafety Instructions Regulatory Notices Federal Communications Commission FCCIntroduction Package Contents Before InstallationModel Description Installation General Troubleshooting Problem Possible SolutionSpecifications Part ListPower Consumption and DDC Power Requirements Description ’ty MaterialMaterial Signal Pin AssignmentCharacteristics of DVI Connector ElectricalCharacteristics of FO-DVI-XX Cable Optical Fiber Construction and CharacteristicDescription Dimension of FO-DVI-XX-MM Cable Items Uni Specification FO-DVI-XX Cable ConstructionPhysical Interconnect Specification Mechanical CharacteristicsTest Condition Requirements Connector Electrical Characteristics Disclaimer
Top Page Image Contents