Avenview FO-DVI-XX-MM Physical Interconnect Specification, Mechanical Characteristics

2.7 Physical Interconnect Specification

2.7.1 Mechanical Characteristics

Item	Test Condition			Requirements
Vibration	ANSI/EIA-364-28, Condition III Method			No discontinuity at 1us or longer (each
	5A, 15 minute/axis			contact) when continuity is tested
				per ANSI/EIA-364-46
Mechanical Shock	ANSI/EIA-364-27 Condition A			No discontinuity at 1us or longer (each
				contact) when continuity is tested
	(specified pulse)
				per ANSI/EIA-364-46
	ANSI/EIA-364-09			Low Level contact resistance per
				ANSI/EIA-364-23
Durability	Automatic cycling to 100 cycles
				10 m maximum change from
	Rate: 10050 cycles per hour
				initial per contact pair
				Un-mating force:
Mating &	ANSI/EIA-364-13			1 kg force minimum,
Un-mating	Insert and extract at a speed of			4 kg force maximum
Forces	25mm/minute			Mating force:
				4.5 kg force maximum
	Test for	cable	strain relief &
Cable Pullout Force	termination	integrity. Cable		No discontinuities greater than 1 us
	subjected to 11.3 kg(25.0 lbs) static
	load for one minute		while
	monitoring	continuity. Isolate

www.avenview.com 14