Extron electronic MVX 88 Series manual Example 5 View ties by selecting outputs

Page 32

Operation, cont’d

Example 5: View ties by selecting outputs

In the following example, the video and audio, audio-only, and video-only ties in the current configuration are viewed by selecting various outputs. The example shows the front panel indications that result from your actions.

NThis example assumes that you have performed example 1, example 2, and example 3.

1.

Select both video and audio for viewing (figure 3-22).

Press the button to cycle through the selections.

I/O

The video LED lights when video is selected. VID

The audio LED lights when audio is selected. AUD

Figure 3-22 — Select video and audio

NEnsure that no input button is selected before you select an output button. If an input button is selected, the indications will not be as described and you may inadvertently establish potential ties that could be created by pressing the Enter button.

If you do inadvertently establish a potential tie by selecting an input and output button, do not press the Enter button. Allow the 5-second timeout to deselect all input and output buttons.

2.

Press and release the Output 3 button (figure 3-23).

 

 

 

 

 

Press and release the Output 3 button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUTS

5

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

 

 

4

 

 

 

 

6

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Output 3 LED lights to indicate that output 3 is selected and it is receiving video or video and audio. The source (or sources, if audio is broken away) is indicated by the Input LED(s).

The Output 1, Output 4, and Output 8 LEDs also light to indicate that they are receiving video from the indicated input. These unselected outputs may or not be receiving audio; you cannot tell from these indications.

INPUTS

5

The Input 5 LED lights to indicate that this input's video is tied to output 3 (and the other lit outputs).

The audio LED blinks to indicate that, for at least one tie, audio is routed from a different source or not tied at all (audio breakaway).

I/O

VID +dB AUD-dB

Figure 3-23 — Select an output

3-14 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation

Page 31 Page 33
Image 32
Page 31 Page 33
Contents VGA Matrix Switcher MVX 44 / 48 / 84 / 88 seriesSafety Instructions English Consignes de Sécurité FrançaisSicherheitsanleitungen Deutsch Instrucciones de seguridad EspañolFCC Class a Notice Page Quick Start MVX Series VGA Matrix Switchers MVX 44 / 48 / 84 / 88 VGA Matrix Switchers Quick Start QS-1Powering up Saving or recalling a presetViewing and adjusting the audio input gain QS-2 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers Quick StartTable of Contents Table of Contents, cont’d One About the Switchers MVX 44 / 48 / 84 / 88 VGA Matrix Switchers IntroductionFeatures Any input to any or all outputsIntroduction, cont’d Two Tabletop use Mounting the SwitcherRack mounting the switcher Furniture mounting the switcher Mounting the switcherCabling and Rear Panel Views Video and audio input connectionsVideo and audio output connections RGB video output connectors Connect Rgbhv videoStrap the audio cable to the extended tail of the connector Remote connection Power connectionControl of the switcher Three Definitions Front Panel Controls and IndicatorsMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Operation Power/data/audio LED Infrared sensor and Power/audio/data LEDInput and output selection controls and indicators Selection and audio/video controls and indicators O and Audio Setup buttonControl buttons and LEDs Video/+dB LED and Audio/-dB LEDIgnores the command Attenuation onButton is released or the lower limit is reached Has reached the maximum attenuation -18 dBCreating a set of ties Powering up the switcherOperations Press and release the Input 5 button figure Example 1 Create a set of video and audio tiesSelect video and audio for the tie figure Current configuration -7 is now Press and release the Enter button figureExample 2 Add a video tie to a set of video and audio ties Select video only for the tie figurePress and release the Output 1 button figure Press and release the Enter button figureSelect audio only for the tie figure Current configuration -12 is nowExample 3 Remove a tie from a set of ties Press and release the Output 4 button figure 15 Deselect the outputSelect both video and audio for viewing figure Viewing the configurationExample 4 View ties by selecting an input Press and release the I/O button figure Press and release the I/O button figureExample 5 View ties by selecting outputs Press and release the Output 3 button figure24 Deselect audio to view video ties only Using presets Example 6 Save a presetExample 7 Recall a preset Preset 2 PresetAdjusting input audio gain and attenuation Press and release the Input 1 button figurePreliminary Example 8 Adjust the input audio gain = unlit, = blinking LEDOutput 1 LED + 2 presses +2 dBExample 9 Resetting audio gain single input SavedPress and release the and buttons simultaneously figure Setting the output audio levelExample 10 Resetting audio gain all inputs Front panel security lockout Executive mode Clearing all ties and presetsResetting the system to factory defaults MemoryTroubleshooting Optimizing the AudioWorksheets Worksheet example 1 System equipmentMain VTGWorksheet example 2 Daily configuration Classical music from the CD player input 5 isWorksheet example 3 Test configuration 45 Worksheet example 3 Test configurationPreliminary Configuration worksheet Input sources Output destinationsPreliminary Four Simple Instruction Set Control Host-to-Switcher instructionsMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote Operation Switcher-initiated messages Symbol definitions Switcher error responsesUsing the command/response table Command Ascii command Response Additional Description$ *X% G InX$ AudX Audio mute commands Preliminary EVM EZG Click the Files of type drop box and select All files Loading firmware using an SIS commandResponds with the Go prompt Exit HyperTerminal File figureThis message indicates that the firmware upload is complete Matrix Switchers Control Program Installing the softwareScroll to the desired program and click Install figure Click the Software tab figureUsing the software To run the Matrix Switchers Control Program, clickOverview Comm Port Selection window -8 appearsExtron Matrix Switchers Control Program window blank Updating the firmware 11 Open windowMVX 44 / 48 / 84 / 88 VGA Matrix Switchers Remote Operation Windows buttons, drop boxes, and trash Windows menus File menu13 RGB Delay/Mute/Output-Volume Adjust window Tools menuPreferences menu 15 Ties shown as lines16 Ties shown as crosspoints Using Emulation mode Master-Reset selectionUsing the help system Help menu on the main screenPreliminary AppendixAA Specifications and Part Numbers SpecificationsSync Specifications and Part Numbers, cont’d Part Numbers and Accessories MVX matrix switcher part numbersMatrix switcher part numbers Part number Included partsAccessories CablesVGA to 5 BNC cables Part number Install kit Part numberMale-to-male VGA cable Part number Preliminary Extron Electronics, Europe Asia JapanExtron USA West

MVX 88 Series specifications

The Extron MVX 88 Series is a cutting-edge technology solution designed to facilitate seamless audio and video signal routing in a variety of settings, from educational institutions to corporate environments. This versatile matrix switcher series supports the demanding needs required for high-performance AV distribution.

One of the key features of the MVX 88 Series is its ability to handle multiple input and output formats, including HDMI, VGA, and composite video, ensuring versatility in connecting various devices. It supports resolutions up to 1920x1200 at 60 Hz, providing crystal-clear image quality. The series 8x8 matrix switcher allows users to route any input to any output, offering maximum flexibility in AV configurations. This means that users can easily switch between multiple sources without the need for complex wiring.

Another notable characteristic of the MVX 88 Series is its integrated scaling capabilities. Each output has a built-in video scaler that adjusts the input signal to match the required resolution of the display device. This technology enhances viewing experiences by eliminating compatibility issues, making it easier to connect different devices and ensuring optimal picture clarity.

The Extron MVX 88 Series also boasts advanced audio functionality. It features a built-in audio router and supports various audio formats, allowing users to manage audio signals alongside video. This capability is crucial for applications where synchronized audio and video output is essential, such as presentations and video conferences.

In terms of control, the MVX 88 Series is designed for ease of use. It includes an intuitive front panel interface, allowing users to quickly select inputs and outputs. Additionally, it supports various external control options, including RS-232 and Ethernet, making it compatible with a wide range of control systems. This adaptability simplifies integration into existing AV setups.

Durability and reliability are critical aspects of the MVX 88 Series. It is built to withstand rigorous daily use, featuring a robust enclosure that protects the internal components. Furthermore, Extron's commitment to quality ensures that users can depend on the MVX 88 for consistent performance in all applications.

Overall, the Extron MVX 88 Series stands out in the realm of AV matrix switchers, offering remarkable features, advanced technologies, and user-friendly characteristics that meet the demands of modern AV environments. Whether for classrooms, conference rooms, or control centers, the MVX 88 Series is an ideal solution for comprehensive audio and video management.
Top Page Image Contents