Extron electronic MTP 15HD manual Installation and Operation Overview

Page 11

Installation

and Operation

This section provides information on:

•• Installation and Operation Overview

•• Front Panel Features

•• Transmitter Rear Panel Features

•• Receiver Rear Panel Features

•• Power Supply Wiring and Grounding

•• Twisted Pair Cable Termination

•• Skew Delay Compensation

•• EDID Configuration

Installation and Operation Overview

Follow the steps below to properly install and operate any of the Extron MTP 15HD RS transmitters and receivers.

ATTENTION: Potential damage to property.

Do not connect these devices to a computer data or telecommunications network.

Installation

1.Power off all MTPs and devices. Make sure that the input sources, the MTP, and the output sources are all powered off and all power sources and signal cables are disconnected.

2.Connect the transmitter inputs (see Transmitter Rear Panel Features on page 9).

3.Connect twisted pair (TP) cables between the MTP units (see Transmitter Rear Panel Features on page 9 and Receiver Rear Panel Features on page 11).

4.Connect the receiver outputs (see Receiver Rear Panel Features on page 11).

5.Configure the receiver DIP switches (see Receiver Panel Features on page 11).

6.Configure the EDID (see Front Panel Features on page 6 and EDID Configuration on page 16).

7.Connect the power supply and turn on all devices (see Power Supply Wiring and Grounding on page 12).

8.Adjust the level and peaking (see Front Panel Features on page 6).

9.Adjust the skew delay control (see Front Panel Features on page 6).

10.If applicable, mount the MTPs (see Mounting on page 17).

MTP 15HD RS Series • Installation and Operation

5

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User Guide Safety Instructions English Safety InstructionsRegistered Trademarks FCC Class a NoticeNotifications Specifications AvailabilityConventions Used in this Guide Contents Page About the MTP Transmitters and Receivers About this GuideTwisted Pair Cable Advantages Transmission Distance Video Format Pre-Peak Max. Distance Off High Quality Installation Installation and Operation OverviewMTP RL 15HD RS SEQ receiver Front Panel FeaturesMTP 15HD RS Series Installation and Operation MTP 15HD RS Series Installation and Operation Shows the rear of an MTP T 15HD RS transmitter Transmitter Rear Panel FeaturesMTP 15HD RS Series Installation and Operation Receiver Rear Panel Receiver Rear Panel FeaturesPower Connector Wiring and Grounding Power Supply Wiring and GroundingMTP 15HD RS Series Installation and Operation Twisted Pair Cable Termination RJ-45 ConnectorNon-SEQ Receiver Skew Compensation Skew Delay CompensationSEQ Receiver Skew Compensation Recording a Display Edid Edid ConfigurationUsing a Pre-Programmed or User-Recorded Edid UL Guidelines for Rack Mounting Tabletop PlacementUnder Desk and Furniture Mounting Rack MountingProjector Mounting Rack Mounting ProcedureBack of the Rack Mounting Procedure USA, Canada, South America Central America Japan Extron Warranty
Related manuals
Manual 24 pages 44.37 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.
Top Page Image Contents