Extron electronic MTP 15HD Tabletop Placement, Under Desk and Furniture Mounting, Rack Mounting

Page 23

Mounting

This section outlines the various mounting options available for the MTP 15HD RS Series transmitters and receivers:

•• Tabletop Placement

•• Under-Desk and Furniture Mounting

•• Rack Mounting

•• Projector Mounting

Tabletop Placement

Attach the four provided rubber feet to the bottom of the unit and place it in any convenient location.

Under Desk and Furniture Mounting

Mount the unit under a desk or podium using an optional Extron under desk mounting kit (see www.extron.com).

To mount the unit, follow the instructions provided with the mounting kit.

Rack Mounting

UL Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of these products in a rack:

•• Elevated operating ambient temperature — If the unit is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature

(TMA = +122 °F, +50 °C) specified by Extron.

•• Reduced air flow — Install the equipment in the rack so that safe operation and adequate air flow is provided to the unit.

•• Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

•• Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Consider the equipment nameplate ratings when addressing this concern.

•• Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

MTP 15HD RS Series • Mounting

17

Image 23
Contents User Guide Safety Instructions English Safety InstructionsRegistered Trademarks FCC Class a NoticeNotifications Specifications AvailabilityConventions Used in this Guide Contents Page About the MTP Transmitters and Receivers About this GuideTwisted Pair Cable Advantages Transmission Distance Video Format Pre-Peak Max. Distance Off High Quality Installation Installation and Operation OverviewMTP RL 15HD RS SEQ receiver Front Panel FeaturesMTP 15HD RS Series Installation and Operation MTP 15HD RS Series Installation and Operation Shows the rear of an MTP T 15HD RS transmitter Transmitter Rear Panel FeaturesMTP 15HD RS Series Installation and Operation Receiver Rear Panel Receiver Rear Panel FeaturesPower Connector Wiring and Grounding Power Supply Wiring and GroundingMTP 15HD RS Series Installation and Operation Twisted Pair Cable Termination RJ-45 ConnectorNon-SEQ Receiver Skew Compensation Skew Delay CompensationSEQ Receiver Skew Compensation Recording a Display Edid Edid ConfigurationUsing a Pre-Programmed or User-Recorded Edid UL Guidelines for Rack Mounting Tabletop PlacementUnder Desk and Furniture Mounting Rack MountingProjector Mounting Rack Mounting ProcedureBack of the Rack Mounting Procedure USA, Canada, South America Central America Japan Extron Warranty
Related manuals
Manual 24 pages 44.37 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.