Extron electronic MTP 15HD specs

DVertical frequency DIP switch — The first DIP switch selects the vertical frequency for the pre-programmed EDID. When switched to Off (default position), the EDID selected by the rotary positions 1 through E are based on 60 Hz. When switched to On, they are based on 50 Hz. The second DIP switch, marked Spare, is not used.

NOTE: When the EDID select rotary switch (E) is in position 0 or F, the setting of the first DIP switch is not applicable because the user-recorded or attached display EDID is being used.

EEDID select rotary switch — The rotary switch selects specific pre-programmed or user-recorded EDID settings. Position 0 of this 16 position rotary switch selects the user recorded EDID. Position F passes the EDID from the display connected to the loop-out back to the input. Positions 1 through E select

pre-programmed EDID resolutions.

NOTE: The refresh rate of the pre-programmed EDID resolutions is selected using the first DIP switch (D).

FLevel control — The level control alters the video output voltage to affect the brightness of the displayed image. Adjust the knob while viewing the displayed image to set the level that provides the best picture quality.

NOTE: For best results when using an RL receiver, connect a load to the buffered output on the receiver before adjusting the level.

GPeaking control — Peaking affects the sharpness of a picture. Increased peaking can compensate for mid and high frequency detail loss from low bandwidth system components or capacitance in long cables. The minimum setting (at the counterclockwise limit) provides no peaking. The maximum setting (at the clockwise limit) provides 100% peaking. Adjust this control to obtain the optimum picture sharpness.

HSelect button (SEQ model only) — This recessed button selects the Red, Green, or Blue video signal to adjust and resets all three video signals to a skew delay of zero nanoseconds.

Use a small screwdriver to press and release this button to cycle among selecting the red, green, or blue video signal to adjust. The selected signal is indicated by the red, green, and blue LEDs (I).

NOTE: The SEQ receiver automatically saves the setting for the video signal that is being deselected when you push this button or when the selection times out after 10 seconds.

Press and hold this button for approximately 3 seconds to set the skew delay for red, green, and blue to zero. The red, green, and blue LEDs (I) all turn off. Release the button.

IRed, Green, and Blue LEDs (SEQ model only) — These LEDs indicate the video signal that is selected by the Select button (H) for skew adjustment using the Delay control (J). The LED of the selected color flashes when skew compensation for the selected video signal has reached the minimum or maximum limit.

MTP 15HD RS Series • Installation and Operation

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.