Extron electronic manual MTP 15HD RS Series Installation and Operation

Page 14

JDelay (skew adjustment) control (SEQ model only) — This control delays the selected red, green, or blue video signal by up to 62 nanoseconds. The delay is applied in incremental, 2-nanosecond steps. Rotate the control counterclockwise to reduce the delay or clockwise to increase the delay.

NOTES:

The control turns smoothly; it does not have mechanical steps or high and low limit stops.

Watch the displayed image to observe the steps of delay.

The selected red, green, or blue LED (I) flashes to indicate that the control has reached the minimum (counterclockwise rotation) or maximum (clockwise rotation) limit.

KDIP switches (RL receivers only) — A 5-pole DIP switch configures the features of the MTP receivers.

Horizontal sync (H Sync +) switch — Set this switch On (up) for positive horizontal sync or Off (down) for negative sync.

Vertical sync (V Sync +) switch — Set this switch On (up) for positive vertical sync or Off (down) for negative sync.

NOTE: Most devices use negative sync for H Sync and V Sync.

S-Video switch — This switch sets which pins of the 15-pin HD connector S-video is output on.

Set this switch On (up) to output chroma on pin 3 and luma on pin 2.

Set this switch Off (down) to output chroma on pin 1 and luma on pin 2.

End Unit switch — Set this switch On (up) if either of the following is true:

The receiver being configured is the only receiver connected to the transmitter.

The receiver being configured is the last receiver in a daisy-chained system.

Set the End Unit switch Off (down) on the receiver being configured if there are one or more receivers connected to the Buffered Output RJ-45 connector (see C on page 11).

BI-232 switch — Set this switch On (up) for bidirectional communication or Off (down) for unidirectional communication.

MTP 15HD RS Series • Installation and Operation

8

Image 14
Contents User Guide Safety Instructions Safety Instructions EnglishFCC Class a Notice Registered TrademarksNotifications Specifications AvailabilityConventions Used in this Guide Contents Page About this Guide About the MTP Transmitters and ReceiversTwisted Pair Cable Advantages Transmission Distance Video Format Pre-Peak Max. Distance Off High Quality Installation and Operation Overview InstallationFront Panel Features MTP RL 15HD RS SEQ receiverMTP 15HD RS Series Installation and Operation MTP 15HD RS Series Installation and Operation Transmitter Rear Panel Features Shows the rear of an MTP T 15HD RS transmitterMTP 15HD RS Series Installation and Operation Receiver Rear Panel Features Receiver Rear PanelPower Supply Wiring and Grounding Power Connector Wiring and GroundingMTP 15HD RS Series Installation and Operation RJ-45 Connector Twisted Pair Cable TerminationNon-SEQ Receiver Skew Compensation Skew Delay CompensationSEQ Receiver Skew Compensation Recording a Display Edid Edid ConfigurationUsing a Pre-Programmed or User-Recorded Edid Rack Mounting Tabletop PlacementUnder Desk and Furniture Mounting UL Guidelines for Rack MountingProjector Mounting Rack Mounting ProcedureBack of the Rack Mounting Procedure Extron Warranty USA, Canada, South America Central America Japan
Related manuals
Manual 24 pages 44.37 Kb

MTP 15HD specifications

Extron Electronics is known for its innovative solutions in audio-visual technology, and the MTP 15HD stands out as a versatile and efficient solution for video signal distribution. The MTP 15HD is part of Extron’s series of Media Transport Products, designed specifically for applications that require high-definition video transmission over long distances.

One of the main features of the MTP 15HD is its ability to transmit HD video signals up to 1920x1200 resolution, ensuring stunning picture quality for professional environments. It supports various video formats, including RGBHV, component video, and composite video, allowing for compatibility with a wide range of devices. This versatility makes it ideal for use in educational institutions, corporate environments, and control rooms where flexibility is key.

Another notable technology employed in the MTP 15HD is its use of twisted pair cable, which facilitates long-distance transmission. By utilizing Extron’s proprietary HDMI technology, the MTP 15HD can deliver video signals up to 300 feet (91 meters) over a single CATx cable, minimizing signal degradation and ensuring reliable performance. This feature significantly reduces installation costs associated with traditional coaxial cabling methods.

The MTP 15HD also incorporates advanced signal processing technology, allowing it to automatically adjust to the signal quality, optimizing performance for the source device and the output display. This adaptive feature ensures that users experience the best possible video quality without manual intervention.

Another advantage of the MTP 15HD is its user-friendly design. The device is compact and rack-mountable, making it suitable for both permanent installations and portable applications. It also supports hot-swappable operation, allowing users to replace or add devices without interrupting the signal flow.

Overall, the Extron MTP 15HD stands as a robust solution for high-definition video signal distribution. Its combination of high-resolution support, extensive range capabilities, and versatile input options make it an essential component for any advanced audio-visual setup. Whether for corporate presentations, education, or broadcasting, the MTP 15HD enhances connectivity and delivers exceptional performance, embodying Extron's commitment to quality and innovation in the AV market.