Extron electronic MPX 866 A manual Example 2, final configuration

5.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

The Enter LED and all input LEDs and output LEDs return to the unlit state.

The current configuration (see figure 13) is now:

zzInput 5 video tied to output 1, output 3, output 4, and output 6 zz Input 5 audio tied to output 3, output 4, and output 6

Input

5

1

3

4 Output

6

Video

Audio

Figure 13. Example 2, final configuration

Example 3: Removing a tie from a set of computer video and audio ties

In the following example, an existing audio tie is removed from the current configuration. The steps show the front panel indications that result from your action.

NOTE: This example assumes that you have performed example 1 and example 2.

1.Clear all selections: Press and release the Esc button. The button flashes once.

2.Select audio only for the tie: If necessary, press and release the Video button and the

Audio button.

I/O

VIDEO AUDIO

Press the Video button to toggle on and off. The LED is unlit when deselected.

Press the Audio button to toggle on and off. The LED lights when selected.

3.Select an input: Press and release the input 5 button.

Press and release the Computer Input 5 button. The LED lights.

COMPUTER INPUTS

3 4 5 6

The Computer/Audio Output 3, Output 4, and Output 6 LEDs light to indicate the audio ties created in example 1.

The output 1 LED does not light to indicate the tie created in example 2 because that tie is computer video only.

1 2 3 4 5 6

COMPUTER/AUDIO OUTPUTS

MPX 866 A Media Presentation Matrix Switcher • Operation 27