Extron electronic MPX 866 A manual Zz Tie any input to any or all outputs within a video group

Page 9

Audio — Input and output balanced or unbalanced stereo audio on 3.5 mm, 5-pole captive screw terminals.

Audio input gain/attenuation — Individual input audio levels can be adjusted so there are no noticeable volume differences between sources. Users can set the input level of audio gain or attenuation (-18 dB to +24 dB) via the Ethernet link, RS-232 link, or the front panel.

Audio output volume — The audio volume of each output can be displayed and adjusted through a range from full output to completely silent from the front panel or via RS-232 or Ethernet control.

Switching flexibility — Provides individually buffered, independent matrix switched outputs with audio follow and audio breakaway.

NOTE: Audio switching is independent of the video groups.

zzTie any input to any or all outputs within a video group

zzQuick multiple tie — Multiple inputs can be switched to multiple outputs within a video group simultaneously. This allows all displays (outputs) to change from source to source at the same time.

zzAudio follow — Audio can be switched with its corresponding video input via front panel control or under Ethernet or RS-232 remote control.

zzAudio breakaway — Audio can be broken away from its corresponding video signal. This feature allows any audio signal to be selected with any video signal simultaneously to one or all outputs in any combination. Audio breakaway switching can be done via front panel control or under Ethernet or RS-232 remote control.

Operational flexibility — Operations such as input/output selection, setting of presets, and adjustment of audio levels can be performed on the front panel or via the Ethernet or RS-232 link. The Ethernet and RS-232 links allow remote control via a PC or control system. The Ethernet link allows multiple remote links with two levels of password protection.

zzFront panel control — The front panel controller supports input and output selection, preset creation and selection, and audio gain and attenuation and volume control. The front panel features slots for labels that can identify each input and output with text or graphics.

zzWindows-based control program — For RS-232 remote control from a PC, the

Extron Windows-based control software provides a graphical interface and drag- and-drop/point-and-click operation. The Windows-based control program also has an emulation mode that lets you create a switcher configuration file at the home office and then download it for use by the switcher on site.

zzSimple Instruction Set (SIS™) — The remote control protocol uses the Extron SIS for easy programming and operation.

zzRemote control panels and keypads — The switcher is remote controllable, using the optional MKP 2000 and MKP 3000 remote control panels. The remote control devices are easy to use and provide tactile buttons for quick selection. Each MKP can be used for input-to-output switching or one-touch switching for a particular output and selecting global presets.

Upgradable firmware — The firmware that controls all switcher operation can be upgraded in the field via RS-232 or Ethernet, without taking the switcher out of service. Firmware upgrades are available for download on the Extron website, www.extron.com, and they can be installed using the Windows-based control program.

Labeling — The included Extron Button-Label Generator software lets you create labels to place in the front panel I/O buttons, with names, alphanumeric characters, or color bitmaps for easy and intuitive input and output selection. Alternatively, labels can be made with any Brother® P-Touch®or comparable labeler.

MPX 866 A Media Presentation Matrix Switcher • Introduction

4

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MPX 866 a Safety Instructions English Extron Electronics. All rights reserved FCC Class a NoticeContents 120 113Typical MPX 866 a Application About this GuideAbout the Media Presentation Matrix Switcher Features DefinitionsBandwidth Zz Tie any input to any or all outputs within a video group MPX 866 a Media Presentation Matrix Switcher Introduction Perform Physical Installation Setup and Installation ChecklistInstall Software Install the Matrix Switchers Control ProgramRear Panel Cabling and Features Video Input and OutputComputer video group Video Input 11 through Video Input Low resolution video groupComposite video outputs Video Output 7 and Video Output Video outputs Video Output 9 and Video OutputAudio inputs either input subgroup Audio input and outputAudio outputs computer/audio output subgroup only Captive screw connector wiring for stereo audio outputSerial Ports RS-232 connectorRJ-45 connector wiring Ethernet ConnectionCabling Power Reset Button and LEDFront Panel Configuration Port Front Panel Configuration PortOperation Front Panel Controls and IndicatorsInput and Output Buttons and LEDs Output buttons and LEDs Input buttons and LEDsControl Buttons and LEDs MPX 866 a Media Presentation Matrix Switcher Operation See Muting and Unmuting Video and Audio Outputs on Locks Toggle between mode 0 and mode Action Mode 2 and mode Resets ActionControls Input and Output Label Panels Front Panel OperationsFront Panel Security Lockouts Creating a Configuration Example 1 Creating a set of computer video and audio ties Select an input Press and release the input 5 buttonConfirm the change Press and release the Enter button Select the output Press and release the output 1 button Example 1, final configurationExample 2, final configuration Select the output Press and release the output 4 button Example 3, final configuration, audio switcherVideo Inputs Example 4, final configuration Viewing a Configuration Example Deselect video Press and release the Video button Muting and Unmuting Video and Audio Outputs See Setting the Front Panel Locks Executive Modes onExample 6 Muting and unmuting an output Exit View-onlymode Press and release the View button Using Global PresetsExample 7 Saving a global preset Example 8 Recalling a global preset Example 9 Selecting the S-video format for an input Selecting Composite Video or S-videoExit the Video mode Press and release the Video button Audio gain and attenuation Viewing and Adjusting the Input Audio LevelInput Audio Level Adjustment Displays Adjust the Input Audio Level Example 10 Viewing and adjusting an input audio levelReading the displayed volume Viewing and Adjusting the Output VolumeExit the Audio mode Press and release the Audio button Preset button changes to Recall Preset modeZz Push Esc button Audio Output Volume SettingsZz Push Esc button twice Zz Push Esc button 19 timesSelect an output Press and release the output 1 button Example 11 Viewing and adjusting an output volume levelAdjust the Output Audio Volume Setting the Front Panel Locks Executive ModesToggle Front Panel Lock Between Mode 2 and Mode Selecting Lock mode 2 or toggling between mode 2 and modeSystem Reset Performing a System Reset from the Front PanelSelecting the Baud Rate of the RS-232 Primary Port Setting the Front Panel Locks Executive Modes onSee Matrix Software Rear Panel OperationsPerform a soft reset of the switcher as follows Performing Soft System Resets Modes 3, 4,Optimizing the Audio Performing a Hard ResetTroubleshooting Configuration WorksheetsWorksheet Example 1 System Equipment Worksheet Example 2 Daily Configuration Worksheet Example 2 Daily ConfigurationWorksheet Example 3 Test Configuration Worksheet Example 3 Test ConfigurationComputer video and audio subgroup input sources Blank Configuration WorksheetRS-232 Ports Programming GuideRear Panel Remote Ports Front Panel Configuration PortDefault IP Addresses Ethernet LAN Port0.0 Dhcp off Using Verbose Mode Connection TimeoutsEstablishing a Connection Number of ConnectionsSwitcher-initiated Messages Host-to-Switcher InstructionsUsing the Command and Response Tables Switcher Error ResponsesSymbol Definitions Command and Response Table for SIS CommandsX1 = X1! =Command Ascii Command Response Additional description Command and Response Table for SIS CommandsRead ties Command/Response Table for SIS CommandsAudio output volume Audio input gain and attenuation Preset names Input signal active Lock executive modes X2# Command and Response Table for IP-Specific SIS CommandsX2$ X3% =Special Characters Command and Response Table for IP-Specific SIS CommandsInstalling the Software Matrix Switchers Control ProgramSoftware operation via Ethernet Software operation via a serial portComm Port Selection window see appears Using the Matrix Switcher Control SoftwareIf the IP address is correct, proceed to b Address and Password EntryExtron Matrix Switchers Control Program Window Blank Address and Name fields IP Settings/Options windowUse Dhcp check box Hardware Address fieldDate, Time local, and GMT offset fields Sync Time to PC buttonUse Daylight Savings check box Administrator Password and User Password fields Updating firmware Location of Firmware Upgrade FilesDownloading Firmware Upgrade Files Select Files Window Dialog Box Ethernet-connected firmware uploadClick Exit to close the Firmware Loader Serial-port-connected firmware uploadHtml Files List Window Uploading Html filesWindows Buttons, Drop Boxes, and trash can Windows menusFile menu Tools menu Audio Gain Adjust Dialog BoxSee Uploading Html Files on Preferences menu Audio Input Configuration selectionTies Shown as Crosspoints Using Emulation Mode Master-Reset selectionMaster reset performs all of the following functions Continue using the program as described onUsing the Help system Products Disk that accompanied the switcherButton-Label Generator Program Button-Label Generator window appears see figure Using the Button-Label Generator SoftwareBox, and then click OK Opening the Embedded Web PagesEnter Network Password System Status Status TabSystem Settings Configuration TabIP Settings fields Unit Name fieldIP Address field Dhcp radio buttonsGateway IP Address field Subnet Mask fieldDate/Time Settings Fields Date/Time Settings fieldsPasswords Video Input SettingsFirmware Upgrade Firmware UpgradeFirmware Upgrade File Management File Management TabSet and View Ties Control TabCreating or deleting a tie Change the input gain and attenuation RGB and Audio SettingsClick the desired output Mute and unmute one or all outputsVolume Drop Box Change the output volume levelGlobal Presets Saving a presetRecalling a preset Special Characters Ethernet Link RJ-45 Connector Pinout TablesDefault IP Address Pinging to Determine the Extron IP AddressPinging to Determine the Web IP Address Update was successful Computer returns the command prompt C\Telnet Window Connecting as a Telnet ClientOpen Telnet TipsEscape character and Esc key Local echoGateways Subnetting a PrimerLocal and Remote Devices IP Addresses and OctetsDetermining Whether Devices Are on the Same Subnet Subnet Masks and OctetsUnmasked octets are compared indicated by ? in figure Masked octets are not compared indicated by X in figureSpecifications VideoVideo input Video output SyncAudio Audio input Control/remote switcherAudio output GeneralMatrix switcher part numbers Part Number Optional AccessoriesAdapters, power supplies, labels Part Number Part NumbersRG6 super high resolution cable Part Number MHR mini high resolution cable Part NumberTermination tools and connectors Part Number CablesTerminated cable assemblies Mounting the Switcher UL RequirementsMounting Instructions Printing Instructions Button LabelsButton Label Blanks, 16-button Switcher Europe, Africa, and the Middle China East USA, Canada, South America Japan Central AmericaAsia Middle East Europe
Related manuals
Manual 3 pages 63.9 Kb

MPX 866 A specifications

The Extron MPX 866 A is a powerful multimedia presentation switcher known for its robust functionality and advanced features, ideal for a range of professional environments, particularly in education, corporate, and broadcasting sectors. This device is designed to facilitate seamless switching between multiple audio and video sources, ensuring a smooth and professional presentation experience.

One of the standout features of the MPX 866 A is its ability to handle a variety of input formats, including HDMI, DisplayPort, and analog video signals. This versatility allows users to easily connect different devices, such as laptops, projectors, and video conferencing systems, without the need for additional adapters or converters. The unit supports resolutions up to 4K at 60 Hz, making it suitable for high-definition content display.

The switcher is equipped with Extron’s unique Seamless Switching technology, which provides instantaneous switching between sources without noticeable delays or interruptions. This is particularly beneficial in fast-paced environments where timing is crucial, such as live events or presentations.

Another significant aspect of the MPX 866 A is its advanced audio handling capabilities. It includes integrated audio embedding and de-embedding, allowing users to manage audio signals effectively without compromising quality. The built-in audio delay feature ensures synchronization between audio and video, an essential consideration for professional settings.

For ease of operation, the MPX 866 A offers customizable control options. Users can manage the device through various interfaces, including Extron's user-friendly GUI, third-party control systems, and RS-232 commands. This flexibility makes it easier to integrate the switcher into existing AV setups.

Additionally, the unit incorporates powerful scaling technology, which optimizes image quality by adjusting the resolution of the incoming video signals to match the display capabilities of the output device. This ensures that content appears crisp and clear, regardless of the source resolution.

The MPX 866 A is also designed with reliability in mind, featuring robust construction and a fanless design for silent operation. This makes it suitable for environments where noise reduction is critical.

Overall, the Extron MPX 866 A stands out as a versatile, feature-rich multimedia switcher that enhances the presentation experience. Its advanced technologies and characteristics make it an excellent choice for professionals looking to elevate their audio-visual communication.
Top Page Image Contents