Extron electronic QSD 204 D manual Input Configuration, Main menus

Installation and Operation, cont’d

Power	EXTRON
on	QSD204D

NEXT

Main menus

2 sec.

MENU

INPUT

CONFIG

MENU

OUTPUT

CONFIG

MENU

ADVANCED

CONFIG

MENU

EXIT

MENU

2 sec.

INPUT 1

CMPOSITE

MENU

	2 sec.
	NO
2 sec.	SIGNAL

*The No Signal default menu only occurs if there is no signal present at the currently selected input connector.

To return to the default screens, let the QSD 204 time-out for 10 seconds, or press the Menu button until the Exit Menu menu appears, then press the Next button.

Submenus are accessed from a main menu by pressing the Next button. If you press the Menu button while a submenu is active, the next main menu will become active. For example, the menu will change from the Input Configuration menu or its submenus to the Output Configuration main menu.

Input Configuration

The following flowchart provides an overview of the Input Configuration submenus and the options for each setting.

EXTRON
QSD204D
MENU
INPUT	NEXT
CONFIG

NOTE Input 1 can only accept composite video.

Input 3 can only accept S-video. Only Inputs 2 and 4 can

be configured for different video types, although an SDI input can be be assigned from any Input Configuration menu.

	INPUT 2	NEXT	INPUT 4	NEXT	SDI IN	NEXT
	COMPNENT		RGBcvS		* 1 2 3 <4>
Input 2 video types			Input 4 video types		Assign SDI to Input #
•	Composite		• RGBS		• 1, 2, 3, 4, * (none)
• S-video			• RGBcvS		NOTE The SDI input signal can be
•	Component (default)

assigned to any input. Once assigned to a specific input, only an SDI signal can be accepted on that input. SDI can be disabled by selecting the *.

2-10 QSD 204 • Installation and Operation